/* * Misc utility routines for WL and Apps * This header file housing the define and function prototype use by * both the wl driver, tools & Apps. * * Copyright (C) 1999-2013, Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you * under the terms of the GNU General Public License version 2 (the "GPL"), * available at http://www.broadcom.com/licenses/GPLv2.php, with the * following added to such license: * * As a special exception, the copyright holders of this software give you * permission to link this software with independent modules, and to copy and * distribute the resulting executable under terms of your choice, provided that * you also meet, for each linked independent module, the terms and conditions of * the license of that module. An independent module is a module which is not * derived from this software. The special exception does not apply to any * modifications of the software. * * Notwithstanding the above, under no circumstances may you combine this * software in any way with any other Broadcom software provided under a license * other than the GPL, without Broadcom's express prior written consent. * * $Id: bcmwifi_channels.h 309193 2012-01-19 00:03:57Z $ */ #ifndef _bcmwifi_channels_h_ #define _bcmwifi_channels_h_ /* A chanspec holds the channel number, band, bandwidth and control sideband */ typedef uint16 chanspec_t; /* channel defines */ #define CH_UPPER_SB 0x01 #define CH_LOWER_SB 0x02 #define CH_EWA_VALID 0x04 #define CH_80MHZ_APART 16 #define CH_40MHZ_APART 8 #define CH_20MHZ_APART 4 #define CH_10MHZ_APART 2 #define CH_5MHZ_APART 1 /* 2G band channels are 5 Mhz apart */ #define CH_MAX_2G_CHANNEL 14 /* Max channel in 2G band */ #define MAXCHANNEL 224 /* max # supported channels. The max channel no is 216, * this is that + 1 rounded up to a multiple of NBBY (8). * DO NOT MAKE it > 255: channels are uint8's all over */ #define CHSPEC_CTLOVLP(sp1, sp2, sep) (ABS(wf_chspec_ctlchan(sp1) - wf_chspec_ctlchan(sp2)) < \ (sep)) /* All builds use the new 11ac ratespec/chanspec */ #undef D11AC_IOTYPES #define D11AC_IOTYPES #ifndef D11AC_IOTYPES #define WL_CHANSPEC_CHAN_MASK 0x00ff #define WL_CHANSPEC_CHAN_SHIFT 0 #define WL_CHANSPEC_CTL_SB_MASK 0x0300 #define WL_CHANSPEC_CTL_SB_SHIFT 8 #define WL_CHANSPEC_CTL_SB_LOWER 0x0100 #define WL_CHANSPEC_CTL_SB_UPPER 0x0200 #define WL_CHANSPEC_CTL_SB_NONE 0x0300 #define WL_CHANSPEC_BW_MASK 0x0C00 #define WL_CHANSPEC_BW_SHIFT 10 #define WL_CHANSPEC_BW_10 0x0400 #define WL_CHANSPEC_BW_20 0x0800 #define WL_CHANSPEC_BW_40 0x0C00 #define WL_CHANSPEC_BAND_MASK 0xf000 #define WL_CHANSPEC_BAND_SHIFT 12 #ifdef WL_CHANSPEC_BAND_5G #undef WL_CHANSPEC_BAND_5G #endif #ifdef WL_CHANSPEC_BAND_2G #undef WL_CHANSPEC_BAND_2G #endif #define WL_CHANSPEC_BAND_5G 0x1000 #define WL_CHANSPEC_BAND_2G 0x2000 #define INVCHANSPEC 255 /* channel defines */ #define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0) #define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \ ((channel) + CH_10MHZ_APART) : 0) #define LL_20_SB(channel) (((channel) > 3 * CH_10MHZ_APART) ? ((channel) - 3 * CH_10MHZ_APART) : 0) #define UU_20_SB(channel) (((channel) < (MAXCHANNEL - 3 * CH_10MHZ_APART)) ? \ ((channel) + 3 * CH_10MHZ_APART) : 0) #define LU_20_SB(channel) LOWER_20_SB(channel) #define UL_20_SB(channel) UPPER_20_SB(channel) #define CHSPEC_WLCBANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : BAND_2G_INDEX) #define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \ WL_CHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \ WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G)) #define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \ ((channel) + CH_20MHZ_APART) : 0) #define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \ ((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \ WL_CHANSPEC_BAND_5G)) #define CHSPEC_CHANNEL(chspec) ((uint8)((chspec) & WL_CHANSPEC_CHAN_MASK)) #define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK) /* chanspec stores radio channel & flags to indicate control channel location, i.e. upper/lower */ #define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK) #define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK) #ifdef WL11N_20MHZONLY #define CHSPEC_IS10(chspec) 0 #define CHSPEC_IS20(chspec) 1 #ifndef CHSPEC_IS40 #define CHSPEC_IS40(chspec) 0 #endif #else /* !WL11N_20MHZONLY */ #define CHSPEC_IS10(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10) #define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) #ifndef CHSPEC_IS40 #define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40) #endif #endif /* !WL11N_20MHZONLY */ #define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G) #define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G) #define CHSPEC_SB_NONE(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE) #define CHSPEC_SB_UPPER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER) #define CHSPEC_SB_LOWER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER) #define CHSPEC_CTL_CHAN(chspec) ((CHSPEC_SB_LOWER(chspec)) ? \ (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \ (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK)))) #define CHSPEC2WLC_BAND(chspec) (CHSPEC_IS5G(chspec) ? WLC_BAND_5G : WLC_BAND_2G) #define CHANSPEC_STR_LEN 8 #else /* D11AC_IOTYPES */ #define WL_CHANSPEC_CHAN_MASK 0x00ff #define WL_CHANSPEC_CHAN_SHIFT 0 #define WL_CHANSPEC_CHAN1_MASK 0x000f #define WL_CHANSPEC_CHAN1_SHIFT 0 #define WL_CHANSPEC_CHAN2_MASK 0x00f0 #define WL_CHANSPEC_CHAN2_SHIFT 4 #define WL_CHANSPEC_CTL_SB_MASK 0x0700 #define WL_CHANSPEC_CTL_SB_SHIFT 8 #define WL_CHANSPEC_CTL_SB_LLL 0x0000 #define WL_CHANSPEC_CTL_SB_LLU 0x0100 #define WL_CHANSPEC_CTL_SB_LUL 0x0200 #define WL_CHANSPEC_CTL_SB_LUU 0x0300 #define WL_CHANSPEC_CTL_SB_ULL 0x0400 #define WL_CHANSPEC_CTL_SB_ULU 0x0500 #define WL_CHANSPEC_CTL_SB_UUL 0x0600 #define WL_CHANSPEC_CTL_SB_UUU 0x0700 #define WL_CHANSPEC_CTL_SB_LL WL_CHANSPEC_CTL_SB_LLL #define WL_CHANSPEC_CTL_SB_LU WL_CHANSPEC_CTL_SB_LLU #define WL_CHANSPEC_CTL_SB_UL WL_CHANSPEC_CTL_SB_LUL #define WL_CHANSPEC_CTL_SB_UU WL_CHANSPEC_CTL_SB_LUU #define WL_CHANSPEC_CTL_SB_L WL_CHANSPEC_CTL_SB_LLL #define WL_CHANSPEC_CTL_SB_U WL_CHANSPEC_CTL_SB_LLU #define WL_CHANSPEC_CTL_SB_LOWER WL_CHANSPEC_CTL_SB_LLL #define WL_CHANSPEC_CTL_SB_UPPER WL_CHANSPEC_CTL_SB_LLU #define WL_CHANSPEC_BW_MASK 0x3800 #define WL_CHANSPEC_BW_SHIFT 11 #define WL_CHANSPEC_BW_5 0x0000 #define WL_CHANSPEC_BW_10 0x0800 #define WL_CHANSPEC_BW_20 0x1000 #define WL_CHANSPEC_BW_40 0x1800 #define WL_CHANSPEC_BW_80 0x2000 #define WL_CHANSPEC_BW_160 0x2800 #define WL_CHANSPEC_BW_8080 0x3000 #define WL_CHANSPEC_BAND_MASK 0xc000 #define WL_CHANSPEC_BAND_SHIFT 14 #define WL_CHANSPEC_BAND_2G 0x0000 #define WL_CHANSPEC_BAND_3G 0x4000 #define WL_CHANSPEC_BAND_4G 0x8000 #define WL_CHANSPEC_BAND_5G 0xc000 #define INVCHANSPEC 255 /* channel defines */ #define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? \ ((channel) - CH_10MHZ_APART) : 0) #define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \ ((channel) + CH_10MHZ_APART) : 0) #define LL_20_SB(channel) (((channel) > 3 * CH_10MHZ_APART) ? ((channel) - 3 * CH_10MHZ_APART) : 0) #define UU_20_SB(channel) (((channel) < (MAXCHANNEL - 3 * CH_10MHZ_APART)) ? \ ((channel) + 3 * CH_10MHZ_APART) : 0) #define LU_20_SB(channel) LOWER_20_SB(channel) #define UL_20_SB(channel) UPPER_20_SB(channel) #define LOWER_40_SB(channel) ((channel) - CH_20MHZ_APART) #define UPPER_40_SB(channel) ((channel) + CH_20MHZ_APART) #define CHSPEC_WLCBANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : BAND_2G_INDEX) #define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \ (((channel) <= CH_MAX_2G_CHANNEL) ? \ WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G)) #define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \ ((channel) + CH_20MHZ_APART) : 0) #define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \ ((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \ WL_CHANSPEC_BAND_5G)) #define CH80MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ ((channel) | (ctlsb) | \ WL_CHANSPEC_BW_80 | WL_CHANSPEC_BAND_5G) #define CH160MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ ((channel) | (ctlsb) | \ WL_CHANSPEC_BW_160 | WL_CHANSPEC_BAND_5G) /* simple MACROs to get different fields of chanspec */ #define CHSPEC_CHANNEL(chspec) ((uint8)((chspec) & WL_CHANSPEC_CHAN_MASK)) #define CHSPEC_CHAN1(chspec) ((chspec) & WL_CHANSPEC_CHAN1_MASK) #define CHSPEC_CHAN2(chspec) ((chspec) & WL_CHANSPEC_CHAN2_MASK) #define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK) #define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK) #define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK) #ifdef WL11N_20MHZONLY #define CHSPEC_IS10(chspec) 0 #define CHSPEC_IS20(chspec) 1 #ifndef CHSPEC_IS40 #define CHSPEC_IS40(chspec) 0 #endif #ifndef CHSPEC_IS80 #define CHSPEC_IS80(chspec) 0 #endif #ifndef CHSPEC_IS160 #define CHSPEC_IS160(chspec) 0 #endif #ifndef CHSPEC_IS8080 #define CHSPEC_IS8080(chspec) 0 #endif #else /* !WL11N_20MHZONLY */ #define CHSPEC_IS10(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10) #define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) #ifndef CHSPEC_IS40 #define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40) #endif #ifndef CHSPEC_IS80 #define CHSPEC_IS80(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_80) #endif #ifndef CHSPEC_IS160 #define CHSPEC_IS160(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_160) #endif #ifndef CHSPEC_IS8080 #define CHSPEC_IS8080(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_8080) #endif #endif /* !WL11N_20MHZONLY */ #define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G) #define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G) #define CHSPEC_SB_UPPER(chspec) \ ((((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER) && \ (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)) #define CHSPEC_SB_LOWER(chspec) \ ((((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER) && \ (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)) #define CHSPEC2WLC_BAND(chspec) (CHSPEC_IS5G(chspec) ? WLC_BAND_5G : WLC_BAND_2G) /** * Number of chars needed for wf_chspec_ntoa() destination character buffer. */ #define CHANSPEC_STR_LEN 20 /* Legacy Chanspec defines * These are the defines for the previous format of the chanspec_t */ #define WL_LCHANSPEC_CHAN_MASK 0x00ff #define WL_LCHANSPEC_CHAN_SHIFT 0 #define WL_LCHANSPEC_CTL_SB_MASK 0x0300 #define WL_LCHANSPEC_CTL_SB_SHIFT 8 #define WL_LCHANSPEC_CTL_SB_LOWER 0x0100 #define WL_LCHANSPEC_CTL_SB_UPPER 0x0200 #define WL_LCHANSPEC_CTL_SB_NONE 0x0300 #define WL_LCHANSPEC_BW_MASK 0x0C00 #define WL_LCHANSPEC_BW_SHIFT 10 #define WL_LCHANSPEC_BW_10 0x0400 #define WL_LCHANSPEC_BW_20 0x0800 #define WL_LCHANSPEC_BW_40 0x0C00 #define WL_LCHANSPEC_BAND_MASK 0xf000 #define WL_LCHANSPEC_BAND_SHIFT 12 #define WL_LCHANSPEC_BAND_5G 0x1000 #define WL_LCHANSPEC_BAND_2G 0x2000 #define LCHSPEC_CHANNEL(chspec) ((uint8)((chspec) & WL_LCHANSPEC_CHAN_MASK)) #define LCHSPEC_BAND(chspec) ((chspec) & WL_LCHANSPEC_BAND_MASK) #define LCHSPEC_CTL_SB(chspec) ((chspec) & WL_LCHANSPEC_CTL_SB_MASK) #define LCHSPEC_BW(chspec) ((chspec) & WL_LCHANSPEC_BW_MASK) #define LCHSPEC_IS10(chspec) (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_10) #define LCHSPEC_IS20(chspec) (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_20) #define LCHSPEC_IS40(chspec) (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_40) #define LCHSPEC_IS5G(chspec) (((chspec) & WL_LCHANSPEC_BAND_MASK) == WL_LCHANSPEC_BAND_5G) #define LCHSPEC_IS2G(chspec) (((chspec) & WL_LCHANSPEC_BAND_MASK) == WL_LCHANSPEC_BAND_2G) #define LCHSPEC_CREATE(chan, band, bw, sb) ((uint16)((chan) | (sb) | (bw) | (band))) #define CH20MHZ_LCHSPEC(channel) \ (chanspec_t)((chanspec_t)(channel) | WL_LCHANSPEC_BW_20 | \ WL_LCHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \ WL_LCHANSPEC_BAND_2G : WL_LCHANSPEC_BAND_5G)) #endif /* D11AC_IOTYPES */ /* * WF_CHAN_FACTOR_* constants are used to calculate channel frequency * given a channel number. * chan_freq = chan_factor * 500Mhz + chan_number * 5 */ /** * Channel Factor for the starting frequence of 2.4 GHz channels. * The value corresponds to 2407 MHz. */ #define WF_CHAN_FACTOR_2_4_G 4814 /* 2.4 GHz band, 2407 MHz */ /** * Channel Factor for the starting frequence of 5 GHz channels. * The value corresponds to 5000 MHz. */ #define WF_CHAN_FACTOR_5_G 10000 /* 5 GHz band, 5000 MHz */ /** * Channel Factor for the starting frequence of 4.9 GHz channels. * The value corresponds to 4000 MHz. */ #define WF_CHAN_FACTOR_4_G 8000 /* 4.9 GHz band for Japan */ #define WLC_2G_25MHZ_OFFSET 5 /* 2.4GHz band channel offset */ /** * Convert chanspec to ascii string * * @param chspec chanspec format * @param buf ascii string of chanspec * * @return pointer to buf with room for at least CHANSPEC_STR_LEN bytes * * @see CHANSPEC_STR_LEN */ extern char * wf_chspec_ntoa(chanspec_t chspec, char *buf); /** * Convert ascii string to chanspec * * @param a pointer to input string * * @return >= 0 if successful or 0 otherwise */ extern chanspec_t wf_chspec_aton(const char *a); /** * Verify the chanspec fields are valid. * * Verify the chanspec is using a legal set field values, i.e. that the chanspec * specified a band, bw, ctl_sb and channel and that the combination could be * legal given some set of circumstances. * * @param chanspec input chanspec to verify * * @return TRUE if the chanspec is malformed, FALSE if it looks good. */ extern bool wf_chspec_malformed(chanspec_t chanspec); /** * Verify the chanspec specifies a valid channel according to 802.11. * * @param chanspec input chanspec to verify * * @return TRUE if the chanspec is a valid 802.11 channel */ extern bool wf_chspec_valid(chanspec_t chanspec); /** * Return the primary (control) channel. * * This function returns the channel number of the primary 20MHz channel. For * 20MHz channels this is just the channel number. For 40MHz or wider channels * it is the primary 20MHz channel specified by the chanspec. * * @param chspec input chanspec * * @return Returns the channel number of the primary 20MHz channel */ extern uint8 wf_chspec_ctlchan(chanspec_t chspec); /** * Return the primary (control) chanspec. * * This function returns the chanspec of the primary 20MHz channel. For 20MHz * channels this is just the chanspec. For 40MHz or wider channels it is the * chanspec of the primary 20MHZ channel specified by the chanspec. * * @param chspec input chanspec * * @return Returns the chanspec of the primary 20MHz channel */ extern chanspec_t wf_chspec_ctlchspec(chanspec_t chspec); /** * Return a channel number corresponding to a frequency. * * This function returns the chanspec for the primary 40MHz of an 80MHz channel. * The control sideband specifies the same 20MHz channel that the 80MHz channel is using * as the primary 20MHz channel. */ extern chanspec_t wf_chspec_primary40_chspec(chanspec_t chspec); /* * Return the channel number for a given frequency and base frequency. * The returned channel number is relative to the given base frequency. * If the given base frequency is zero, a base frequency of 5 GHz is assumed for * frequencies from 5 - 6 GHz, and 2.407 GHz is assumed for 2.4 - 2.5 GHz. * * Frequency is specified in MHz. * The base frequency is specified as (start_factor * 500 kHz). * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for * 2.4 GHz and 5 GHz bands. * * The returned channel will be in the range [1, 14] in the 2.4 GHz band * and [0, 200] otherwise. * -1 is returned if the start_factor is WF_CHAN_FACTOR_2_4_G and the * frequency is not a 2.4 GHz channel, or if the frequency is not and even * multiple of 5 MHz from the base frequency to the base plus 1 GHz. * * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2 * * @param freq frequency in MHz * @param start_factor base frequency in 500 kHz units, e.g. 10000 for 5 GHz * * @return Returns a channel number * * @see WF_CHAN_FACTOR_2_4_G * @see WF_CHAN_FACTOR_5_G */ extern int wf_mhz2channel(uint freq, uint start_factor); /** * Return the center frequency in MHz of the given channel and base frequency. * * Return the center frequency in MHz of the given channel and base frequency. * The channel number is interpreted relative to the given base frequency. * * The valid channel range is [1, 14] in the 2.4 GHz band and [0, 200] otherwise. * The base frequency is specified as (start_factor * 500 kHz). * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for * 2.4 GHz and 5 GHz bands. * The channel range of [1, 14] is only checked for a start_factor of * WF_CHAN_FACTOR_2_4_G (4814). * Odd start_factors produce channels on .5 MHz boundaries, in which case * the answer is rounded down to an integral MHz. * -1 is returned for an out of range channel. * * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2 * * @param channel input channel number * @param start_factor base frequency in 500 kHz units, e.g. 10000 for 5 GHz * * @return Returns a frequency in MHz * * @see WF_CHAN_FACTOR_2_4_G * @see WF_CHAN_FACTOR_5_G */ extern int wf_channel2mhz(uint channel, uint start_factor); /** * Convert ctl chan and bw to chanspec * * @param ctl_ch channel * @param bw bandwidth * * @return > 0 if successful or 0 otherwise * */ extern uint16 wf_channel2chspec(uint ctl_ch, uint bw); extern uint wf_channel2freq(uint channel); extern uint wf_freq2channel(uint freq); #endif /* _bcmwifi_channels_h_ */