qmk_firmware/lib/lib8tion/lib8tion.h

935 lines
28 KiB
C
Raw Normal View History

#ifndef __INC_LIB8TION_H
#define __INC_LIB8TION_H
/*
Fast, efficient 8-bit math functions specifically
designed for high-performance LED programming.
Because of the AVR(Arduino) and ARM assembly language
implementations provided, using these functions often
results in smaller and faster code than the equivalent
program using plain "C" arithmetic and logic.
Included are:
- Saturating unsigned 8-bit add and subtract.
Instead of wrapping around if an overflow occurs,
these routines just 'clamp' the output at a maxumum
of 255, or a minimum of 0. Useful for adding pixel
values. E.g., qadd8( 200, 100) = 255.
qadd8( i, j) == MIN( (i + j), 0xFF )
qsub8( i, j) == MAX( (i - j), 0 )
- Saturating signed 8-bit ("7-bit") add.
qadd7( i, j) == MIN( (i + j), 0x7F)
- Scaling (down) of unsigned 8- and 16- bit values.
Scaledown value is specified in 1/256ths.
scale8( i, sc) == (i * sc) / 256
scale16by8( i, sc) == (i * sc) / 256
Example: scaling a 0-255 value down into a
range from 0-99:
downscaled = scale8( originalnumber, 100);
A special version of scale8 is provided for scaling
LED brightness values, to make sure that they don't
accidentally scale down to total black at low
dimming levels, since that would look wrong:
scale8_video( i, sc) = ((i * sc) / 256) +? 1
Example: reducing an LED brightness by a
dimming factor:
new_bright = scale8_video( orig_bright, dimming);
- Fast 8- and 16- bit unsigned random numbers.
Significantly faster than Arduino random(), but
also somewhat less random. You can add entropy.
random8() == random from 0..255
random8( n) == random from 0..(N-1)
random8( n, m) == random from N..(M-1)
random16() == random from 0..65535
random16( n) == random from 0..(N-1)
random16( n, m) == random from N..(M-1)
random16_set_seed( k) == seed = k
random16_add_entropy( k) == seed += k
- Absolute value of a signed 8-bit value.
abs8( i) == abs( i)
- 8-bit math operations which return 8-bit values.
These are provided mostly for completeness,
not particularly for performance.
mul8( i, j) == (i * j) & 0xFF
add8( i, j) == (i + j) & 0xFF
sub8( i, j) == (i - j) & 0xFF
- Fast 16-bit approximations of sin and cos.
Input angle is a uint16_t from 0-65535.
Output is a signed int16_t from -32767 to 32767.
sin16( x) == sin( (x/32768.0) * pi) * 32767
cos16( x) == cos( (x/32768.0) * pi) * 32767
Accurate to more than 99% in all cases.
- Fast 8-bit approximations of sin and cos.
Input angle is a uint8_t from 0-255.
Output is an UNsigned uint8_t from 0 to 255.
sin8( x) == (sin( (x/128.0) * pi) * 128) + 128
cos8( x) == (cos( (x/128.0) * pi) * 128) + 128
Accurate to within about 2%.
- Fast 8-bit "easing in/out" function.
ease8InOutCubic(x) == 3(x^i) - 2(x^3)
ease8InOutApprox(x) ==
faster, rougher, approximation of cubic easing
ease8InOutQuad(x) == quadratic (vs cubic) easing
- Cubic, Quadratic, and Triangle wave functions.
Input is a uint8_t representing phase withing the wave,
similar to how sin8 takes an angle 'theta'.
Output is a uint8_t representing the amplitude of
the wave at that point.
cubicwave8( x)
quadwave8( x)
triwave8( x)
- Square root for 16-bit integers. About three times
faster and five times smaller than Arduino's built-in
generic 32-bit sqrt routine.
sqrt16( uint16_t x ) == sqrt( x)
- Dimming and brightening functions for 8-bit
light values.
dim8_video( x) == scale8_video( x, x)
dim8_raw( x) == scale8( x, x)
dim8_lin( x) == (x<128) ? ((x+1)/2) : scale8(x,x)
brighten8_video( x) == 255 - dim8_video( 255 - x)
brighten8_raw( x) == 255 - dim8_raw( 255 - x)
brighten8_lin( x) == 255 - dim8_lin( 255 - x)
The dimming functions in particular are suitable
for making LED light output appear more 'linear'.
- Linear interpolation between two values, with the
fraction between them expressed as an 8- or 16-bit
fixed point fraction (fract8 or fract16).
lerp8by8( fromU8, toU8, fract8 )
lerp16by8( fromU16, toU16, fract8 )
lerp15by8( fromS16, toS16, fract8 )
== from + (( to - from ) * fract8) / 256)
lerp16by16( fromU16, toU16, fract16 )
== from + (( to - from ) * fract16) / 65536)
map8( in, rangeStart, rangeEnd)
== map( in, 0, 255, rangeStart, rangeEnd);
- Optimized memmove, memcpy, and memset, that are
faster than standard avr-libc 1.8.
memmove8( dest, src, bytecount)
memcpy8( dest, src, bytecount)
memset8( buf, value, bytecount)
- Beat generators which return sine or sawtooth
waves in a specified number of Beats Per Minute.
Sine wave beat generators can specify a low and
high range for the output. Sawtooth wave beat
generators always range 0-255 or 0-65535.
beatsin8( BPM, low8, high8)
= (sine(beatphase) * (high8-low8)) + low8
beatsin16( BPM, low16, high16)
= (sine(beatphase) * (high16-low16)) + low16
beatsin88( BPM88, low16, high16)
= (sine(beatphase) * (high16-low16)) + low16
beat8( BPM) = 8-bit repeating sawtooth wave
beat16( BPM) = 16-bit repeating sawtooth wave
beat88( BPM88) = 16-bit repeating sawtooth wave
BPM is beats per minute in either simple form
e.g. 120, or Q8.8 fixed-point form.
BPM88 is beats per minute in ONLY Q8.8 fixed-point
form.
Lib8tion is pronounced like 'libation': lie-BAY-shun
*/
#include <stdint.h>
#define LIB8STATIC static inline
#define LIB8STATIC_ALWAYS_INLINE static inline
#if !defined(__AVR__)
#include <string.h>
// for memmove, memcpy, and memset if not defined here
#endif
#if defined(__arm__)
#if defined(FASTLED_TEENSY3)
// Can use Cortex M4 DSP instructions
#define QADD8_C 0
#define QADD7_C 0
#define QADD8_ARM_DSP_ASM 1
#define QADD7_ARM_DSP_ASM 1
#else
// Generic ARM
#define QADD8_C 1
#define QADD7_C 1
#endif
#define QSUB8_C 1
#define SCALE8_C 1
#define SCALE16BY8_C 1
#define SCALE16_C 1
#define ABS8_C 1
#define MUL8_C 1
#define QMUL8_C 1
#define ADD8_C 1
#define SUB8_C 1
#define EASE8_C 1
#define AVG8_C 1
#define AVG7_C 1
#define AVG16_C 1
#define AVG15_C 1
#define BLEND8_C 1
#elif defined(__AVR__)
// AVR ATmega and friends Arduino
#define QADD8_C 0
#define QADD7_C 0
#define QSUB8_C 0
#define ABS8_C 0
#define ADD8_C 0
#define SUB8_C 0
#define AVG8_C 0
#define AVG7_C 0
#define AVG16_C 0
#define AVG15_C 0
#define QADD8_AVRASM 1
#define QADD7_AVRASM 1
#define QSUB8_AVRASM 1
#define ABS8_AVRASM 1
#define ADD8_AVRASM 1
#define SUB8_AVRASM 1
#define AVG8_AVRASM 1
#define AVG7_AVRASM 1
#define AVG16_AVRASM 1
#define AVG15_AVRASM 1
// Note: these require hardware MUL instruction
// -- sorry, ATtiny!
#if !defined(LIB8_ATTINY)
#define SCALE8_C 0
#define SCALE16BY8_C 0
#define SCALE16_C 0
#define MUL8_C 0
#define QMUL8_C 0
#define EASE8_C 0
#define BLEND8_C 0
#define SCALE8_AVRASM 1
#define SCALE16BY8_AVRASM 1
#define SCALE16_AVRASM 1
#define MUL8_AVRASM 1
#define QMUL8_AVRASM 1
#define EASE8_AVRASM 1
#define CLEANUP_R1_AVRASM 1
#define BLEND8_AVRASM 1
#else
// On ATtiny, we just use C implementations
#define SCALE8_C 1
#define SCALE16BY8_C 1
#define SCALE16_C 1
#define MUL8_C 1
#define QMUL8_C 1
#define EASE8_C 1
#define BLEND8_C 1
#define SCALE8_AVRASM 0
#define SCALE16BY8_AVRASM 0
#define SCALE16_AVRASM 0
#define MUL8_AVRASM 0
#define QMUL8_AVRASM 0
#define EASE8_AVRASM 0
#define BLEND8_AVRASM 0
#endif
#else
// unspecified architecture, so
// no ASM, everything in C
#define QADD8_C 1
#define QADD7_C 1
#define QSUB8_C 1
#define SCALE8_C 1
#define SCALE16BY8_C 1
#define SCALE16_C 1
#define ABS8_C 1
#define MUL8_C 1
#define QMUL8_C 1
#define ADD8_C 1
#define SUB8_C 1
#define EASE8_C 1
#define AVG8_C 1
#define AVG7_C 1
#define AVG16_C 1
#define AVG15_C 1
#define BLEND8_C 1
#endif
///@defgroup lib8tion Fast math functions
///A variety of functions for working with numbers.
///@{
///////////////////////////////////////////////////////////////////////
//
// typdefs for fixed-point fractional types.
//
// sfract7 should be interpreted as signed 128ths.
// fract8 should be interpreted as unsigned 256ths.
// sfract15 should be interpreted as signed 32768ths.
// fract16 should be interpreted as unsigned 65536ths.
//
// Example: if a fract8 has the value "64", that should be interpreted
// as 64/256ths, or one-quarter.
//
//
// fract8 range is 0 to 0.99609375
// in steps of 0.00390625
//
// sfract7 range is -0.9921875 to 0.9921875
// in steps of 0.0078125
//
// fract16 range is 0 to 0.99998474121
// in steps of 0.00001525878
//
// sfract15 range is -0.99996948242 to 0.99996948242
// in steps of 0.00003051757
//
/// ANSI unsigned short _Fract. range is 0 to 0.99609375
/// in steps of 0.00390625
typedef uint8_t fract8; ///< ANSI: unsigned short _Fract
/// ANSI: signed short _Fract. range is -0.9921875 to 0.9921875
/// in steps of 0.0078125
typedef int8_t sfract7; ///< ANSI: signed short _Fract
/// ANSI: unsigned _Fract. range is 0 to 0.99998474121
/// in steps of 0.00001525878
typedef uint16_t fract16; ///< ANSI: unsigned _Fract
/// ANSI: signed _Fract. range is -0.99996948242 to 0.99996948242
/// in steps of 0.00003051757
typedef int16_t sfract15; ///< ANSI: signed _Fract
// accumXY types should be interpreted as X bits of integer,
// and Y bits of fraction.
// E.g., accum88 has 8 bits of int, 8 bits of fraction
typedef uint16_t accum88; ///< ANSI: unsigned short _Accum. 8 bits int, 8 bits fraction
typedef int16_t saccum78; ///< ANSI: signed short _Accum. 7 bits int, 8 bits fraction
typedef uint32_t accum1616;///< ANSI: signed _Accum. 16 bits int, 16 bits fraction
typedef int32_t saccum1516;///< ANSI: signed _Accum. 15 bits int, 16 bits fraction
typedef uint16_t accum124; ///< no direct ANSI counterpart. 12 bits int, 4 bits fraction
typedef int32_t saccum114;///< no direct ANSI counterpart. 1 bit int, 14 bits fraction
#include "math8.h"
#include "scale8.h"
#include "random8.h"
#include "trig8.h"
///////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////
//
// float-to-fixed and fixed-to-float conversions
//
// Note that anything involving a 'float' on AVR will be slower.
/// sfract15ToFloat: conversion from sfract15 fixed point to
/// IEEE754 32-bit float.
LIB8STATIC float sfract15ToFloat( sfract15 y)
{
return y / 32768.0;
}
/// conversion from IEEE754 float in the range (-1,1)
/// to 16-bit fixed point. Note that the extremes of
/// one and negative one are NOT representable. The
/// representable range is basically
LIB8STATIC sfract15 floatToSfract15( float f)
{
return f * 32768.0;
}
///////////////////////////////////////////////////////////////////////
//
// memmove8, memcpy8, and memset8:
// alternatives to memmove, memcpy, and memset that are
// faster on AVR than standard avr-libc 1.8
#if defined(__AVR__)
void * memmove8( void * dst, const void * src, uint16_t num );
void * memcpy8 ( void * dst, const void * src, uint16_t num ) __attribute__ ((noinline));
void * memset8 ( void * ptr, uint8_t value, uint16_t num ) __attribute__ ((noinline)) ;
#else
// on non-AVR platforms, these names just call standard libc.
#define memmove8 memmove
#define memcpy8 memcpy
#define memset8 memset
#endif
///////////////////////////////////////////////////////////////////////
//
// linear interpolation, such as could be used for Perlin noise, etc.
//
// A note on the structure of the lerp functions:
// The cases for b>a and b<=a are handled separately for
// speed: without knowing the relative order of a and b,
// the value (a-b) might be overflow the width of a or b,
// and have to be promoted to a wider, slower type.
// To avoid that, we separate the two cases, and are able
// to do all the math in the same width as the arguments,
// which is much faster and smaller on AVR.
/// linear interpolation between two unsigned 8-bit values,
/// with 8-bit fraction
LIB8STATIC uint8_t lerp8by8( uint8_t a, uint8_t b, fract8 frac)
{
uint8_t result;
if( b > a) {
uint8_t delta = b - a;
uint8_t scaled = scale8( delta, frac);
result = a + scaled;
} else {
uint8_t delta = a - b;
uint8_t scaled = scale8( delta, frac);
result = a - scaled;
}
return result;
}
/// linear interpolation between two unsigned 16-bit values,
/// with 16-bit fraction
LIB8STATIC uint16_t lerp16by16( uint16_t a, uint16_t b, fract16 frac)
{
uint16_t result;
if( b > a ) {
uint16_t delta = b - a;
uint16_t scaled = scale16(delta, frac);
result = a + scaled;
} else {
uint16_t delta = a - b;
uint16_t scaled = scale16( delta, frac);
result = a - scaled;
}
return result;
}
/// linear interpolation between two unsigned 16-bit values,
/// with 8-bit fraction
LIB8STATIC uint16_t lerp16by8( uint16_t a, uint16_t b, fract8 frac)
{
uint16_t result;
if( b > a) {
uint16_t delta = b - a;
uint16_t scaled = scale16by8( delta, frac);
result = a + scaled;
} else {
uint16_t delta = a - b;
uint16_t scaled = scale16by8( delta, frac);
result = a - scaled;
}
return result;
}
/// linear interpolation between two signed 15-bit values,
/// with 8-bit fraction
LIB8STATIC int16_t lerp15by8( int16_t a, int16_t b, fract8 frac)
{
int16_t result;
if( b > a) {
uint16_t delta = b - a;
uint16_t scaled = scale16by8( delta, frac);
result = a + scaled;
} else {
uint16_t delta = a - b;
uint16_t scaled = scale16by8( delta, frac);
result = a - scaled;
}
return result;
}
/// linear interpolation between two signed 15-bit values,
/// with 8-bit fraction
LIB8STATIC int16_t lerp15by16( int16_t a, int16_t b, fract16 frac)
{
int16_t result;
if( b > a) {
uint16_t delta = b - a;
uint16_t scaled = scale16( delta, frac);
result = a + scaled;
} else {
uint16_t delta = a - b;
uint16_t scaled = scale16( delta, frac);
result = a - scaled;
}
return result;
}
/// map8: map from one full-range 8-bit value into a narrower
/// range of 8-bit values, possibly a range of hues.
///
/// E.g. map myValue into a hue in the range blue..purple..pink..red
/// hue = map8( myValue, HUE_BLUE, HUE_RED);
///
/// Combines nicely with the waveform functions (like sin8, etc)
/// to produce continuous hue gradients back and forth:
///
/// hue = map8( sin8( myValue), HUE_BLUE, HUE_RED);
///
/// Mathematically simiar to lerp8by8, but arguments are more
/// like Arduino's "map"; this function is similar to
///
/// map( in, 0, 255, rangeStart, rangeEnd)
///
/// but faster and specifically designed for 8-bit values.
LIB8STATIC uint8_t map8( uint8_t in, uint8_t rangeStart, uint8_t rangeEnd)
{
uint8_t rangeWidth = rangeEnd - rangeStart;
uint8_t out = scale8( in, rangeWidth);
out += rangeStart;
return out;
}
///////////////////////////////////////////////////////////////////////
//
// easing functions; see http://easings.net
//
/// ease8InOutQuad: 8-bit quadratic ease-in / ease-out function
/// Takes around 13 cycles on AVR
#if EASE8_C == 1
LIB8STATIC uint8_t ease8InOutQuad( uint8_t i)
{
uint8_t j = i;
if( j & 0x80 ) {
j = 255 - j;
}
uint8_t jj = scale8( j, j);
uint8_t jj2 = jj << 1;
if( i & 0x80 ) {
jj2 = 255 - jj2;
}
return jj2;
}
#elif EASE8_AVRASM == 1
// This AVR asm version of ease8InOutQuad preserves one more
// low-bit of precision than the C version, and is also slightly
// smaller and faster.
LIB8STATIC uint8_t ease8InOutQuad(uint8_t val) {
uint8_t j=val;
asm volatile (
"sbrc %[val], 7 \n"
"com %[j] \n"
"mul %[j], %[j] \n"
"add r0, %[j] \n"
"ldi %[j], 0 \n"
"adc %[j], r1 \n"
"lsl r0 \n" // carry = high bit of low byte of mul product
"rol %[j] \n" // j = (j * 2) + carry // preserve add'l bit of precision
"sbrc %[val], 7 \n"
"com %[j] \n"
"clr __zero_reg__ \n"
: [j] "+&a" (j)
: [val] "a" (val)
: "r0", "r1"
);
return j;
}
#else
#error "No implementation for ease8InOutQuad available."
#endif
/// ease16InOutQuad: 16-bit quadratic ease-in / ease-out function
// C implementation at this point
LIB8STATIC uint16_t ease16InOutQuad( uint16_t i)
{
uint16_t j = i;
if( j & 0x8000 ) {
j = 65535 - j;
}
uint16_t jj = scale16( j, j);
uint16_t jj2 = jj << 1;
if( i & 0x8000 ) {
jj2 = 65535 - jj2;
}
return jj2;
}
/// ease8InOutCubic: 8-bit cubic ease-in / ease-out function
/// Takes around 18 cycles on AVR
LIB8STATIC fract8 ease8InOutCubic( fract8 i)
{
uint8_t ii = scale8_LEAVING_R1_DIRTY( i, i);
uint8_t iii = scale8_LEAVING_R1_DIRTY( ii, i);
uint16_t r1 = (3 * (uint16_t)(ii)) - ( 2 * (uint16_t)(iii));
/* the code generated for the above *'s automatically
cleans up R1, so there's no need to explicitily call
cleanup_R1(); */
uint8_t result = r1;
// if we got "256", return 255:
if( r1 & 0x100 ) {
result = 255;
}
return result;
}
/// ease8InOutApprox: fast, rough 8-bit ease-in/ease-out function
/// shaped approximately like 'ease8InOutCubic',
/// it's never off by more than a couple of percent
/// from the actual cubic S-curve, and it executes
/// more than twice as fast. Use when the cycles
/// are more important than visual smoothness.
/// Asm version takes around 7 cycles on AVR.
#if EASE8_C == 1
LIB8STATIC fract8 ease8InOutApprox( fract8 i)
{
if( i < 64) {
// start with slope 0.5
i /= 2;
} else if( i > (255 - 64)) {
// end with slope 0.5
i = 255 - i;
i /= 2;
i = 255 - i;
} else {
// in the middle, use slope 192/128 = 1.5
i -= 64;
i += (i / 2);
i += 32;
}
return i;
}
#elif EASE8_AVRASM == 1
LIB8STATIC uint8_t ease8InOutApprox( fract8 i)
{
// takes around 7 cycles on AVR
asm volatile (
" subi %[i], 64 \n\t"
" cpi %[i], 128 \n\t"
" brcc Lshift_%= \n\t"
// middle case
" mov __tmp_reg__, %[i] \n\t"
" lsr __tmp_reg__ \n\t"
" add %[i], __tmp_reg__ \n\t"
" subi %[i], 224 \n\t"
" rjmp Ldone_%= \n\t"
// start or end case
"Lshift_%=: \n\t"
" lsr %[i] \n\t"
" subi %[i], 96 \n\t"
"Ldone_%=: \n\t"
: [i] "+&a" (i)
:
: "r0", "r1"
);
return i;
}
#else
#error "No implementation for ease8 available."
#endif
/// triwave8: triangle (sawtooth) wave generator. Useful for
/// turning a one-byte ever-increasing value into a
/// one-byte value that oscillates up and down.
///
/// input output
/// 0..127 0..254 (positive slope)
/// 128..255 254..0 (negative slope)
///
/// On AVR this function takes just three cycles.
///
LIB8STATIC uint8_t triwave8(uint8_t in)
{
if( in & 0x80) {
in = 255 - in;
}
uint8_t out = in << 1;
return out;
}
// quadwave8 and cubicwave8: S-shaped wave generators (like 'sine').
// Useful for turning a one-byte 'counter' value into a
// one-byte oscillating value that moves smoothly up and down,
// with an 'acceleration' and 'deceleration' curve.
//
// These are even faster than 'sin8', and have
// slightly different curve shapes.
//
/// quadwave8: quadratic waveform generator. Spends just a little more
/// time at the limits than 'sine' does.
LIB8STATIC uint8_t quadwave8(uint8_t in)
{
return ease8InOutQuad( triwave8( in));
}
/// cubicwave8: cubic waveform generator. Spends visibly more time
/// at the limits than 'sine' does.
LIB8STATIC uint8_t cubicwave8(uint8_t in)
{
return ease8InOutCubic( triwave8( in));
}
/// squarewave8: square wave generator. Useful for
/// turning a one-byte ever-increasing value
/// into a one-byte value that is either 0 or 255.
/// The width of the output 'pulse' is
/// determined by the pulsewidth argument:
///
///~~~
/// If pulsewidth is 255, output is always 255.
/// If pulsewidth < 255, then
/// if input < pulsewidth then output is 255
/// if input >= pulsewidth then output is 0
///~~~
///
/// the output looking like:
///
///~~~
/// 255 +--pulsewidth--+
/// . | |
/// 0 0 +--------(256-pulsewidth)--------
///~~~
///
/// @param in
/// @param pulsewidth
/// @returns square wave output
LIB8STATIC uint8_t squarewave8( uint8_t in, uint8_t pulsewidth)
{
if( in < pulsewidth || (pulsewidth == 255)) {
return 255;
} else {
return 0;
}
}
// Beat generators - These functions produce waves at a given
// number of 'beats per minute'. Internally, they use
// the Arduino function 'millis' to track elapsed time.
// Accuracy is a bit better than one part in a thousand.
//
// beat8( BPM ) returns an 8-bit value that cycles 'BPM' times
// per minute, rising from 0 to 255, resetting to zero,
// rising up again, etc.. The output of this function
// is suitable for feeding directly into sin8, and cos8,
// triwave8, quadwave8, and cubicwave8.
// beat16( BPM ) returns a 16-bit value that cycles 'BPM' times
// per minute, rising from 0 to 65535, resetting to zero,
// rising up again, etc. The output of this function is
// suitable for feeding directly into sin16 and cos16.
// beat88( BPM88) is the same as beat16, except that the BPM88 argument
// MUST be in Q8.8 fixed point format, e.g. 120BPM must
// be specified as 120*256 = 30720.
// beatsin8( BPM, uint8_t low, uint8_t high) returns an 8-bit value that
// rises and falls in a sine wave, 'BPM' times per minute,
// between the values of 'low' and 'high'.
// beatsin16( BPM, uint16_t low, uint16_t high) returns a 16-bit value
// that rises and falls in a sine wave, 'BPM' times per
// minute, between the values of 'low' and 'high'.
// beatsin88( BPM88, ...) is the same as beatsin16, except that the
// BPM88 argument MUST be in Q8.8 fixed point format,
// e.g. 120BPM must be specified as 120*256 = 30720.
//
// BPM can be supplied two ways. The simpler way of specifying BPM is as
// a simple 8-bit integer from 1-255, (e.g., "120").
// The more sophisticated way of specifying BPM allows for fractional
// "Q8.8" fixed point number (an 'accum88') with an 8-bit integer part and
// an 8-bit fractional part. The easiest way to construct this is to multiply
// a floating point BPM value (e.g. 120.3) by 256, (e.g. resulting in 30796
// in this case), and pass that as the 16-bit BPM argument.
// "BPM88" MUST always be specified in Q8.8 format.
//
// Originally designed to make an entire animation project pulse with brightness.
// For that effect, add this line just above your existing call to "FastLED.show()":
//
// uint8_t bright = beatsin8( 60 /*BPM*/, 192 /*dimmest*/, 255 /*brightest*/ ));
// FastLED.setBrightness( bright );
// FastLED.show();
//
// The entire animation will now pulse between brightness 192 and 255 once per second.
// The beat generators need access to a millisecond counter.
// On Arduino, this is "millis()". On other platforms, you'll
// need to provide a function with this signature:
// uint32_t get_millisecond_timer();
// that provides similar functionality.
// You can also force use of the get_millisecond_timer function
// by #defining USE_GET_MILLISECOND_TIMER.
#if (defined(ARDUINO) || defined(SPARK) || defined(FASTLED_HAS_MILLIS)) && !defined(USE_GET_MILLISECOND_TIMER)
// Forward declaration of Arduino function 'millis'.
//uint32_t millis();
#define GET_MILLIS millis
#else
uint32_t get_millisecond_timer(void);
#define GET_MILLIS get_millisecond_timer
#endif
// beat16 generates a 16-bit 'sawtooth' wave at a given BPM,
/// with BPM specified in Q8.8 fixed-point format; e.g.
/// for this function, 120 BPM MUST BE specified as
/// 120*256 = 30720.
/// If you just want to specify "120", use beat16 or beat8.
LIB8STATIC uint16_t beat88( accum88 beats_per_minute_88, uint32_t timebase)
{
// BPM is 'beats per minute', or 'beats per 60000ms'.
// To avoid using the (slower) division operator, we
// want to convert 'beats per 60000ms' to 'beats per 65536ms',
// and then use a simple, fast bit-shift to divide by 65536.
//
// The ratio 65536:60000 is 279.620266667:256; we'll call it 280:256.
// The conversion is accurate to about 0.05%, more or less,
// e.g. if you ask for "120 BPM", you'll get about "119.93".
return (((GET_MILLIS()) - timebase) * beats_per_minute_88 * 280) >> 16;
}
/// beat16 generates a 16-bit 'sawtooth' wave at a given BPM
LIB8STATIC uint16_t beat16( accum88 beats_per_minute, uint32_t timebase)
{
// Convert simple 8-bit BPM's to full Q8.8 accum88's if needed
if( beats_per_minute < 256) beats_per_minute <<= 8;
return beat88(beats_per_minute, timebase);
}
/// beat8 generates an 8-bit 'sawtooth' wave at a given BPM
LIB8STATIC uint8_t beat8( accum88 beats_per_minute, uint32_t timebase)
{
return beat16( beats_per_minute, timebase) >> 8;
}
/// beatsin88 generates a 16-bit sine wave at a given BPM,
/// that oscillates within a given range.
/// For this function, BPM MUST BE SPECIFIED as
/// a Q8.8 fixed-point value; e.g. 120BPM must be
/// specified as 120*256 = 30720.
/// If you just want to specify "120", use beatsin16 or beatsin8.
LIB8STATIC uint16_t beatsin88( accum88 beats_per_minute_88, uint16_t lowest, uint16_t highest, uint32_t timebase, uint16_t phase_offset)
{
uint16_t beat = beat88( beats_per_minute_88, timebase);
uint16_t beatsin = (sin16( beat + phase_offset) + 32768);
uint16_t rangewidth = highest - lowest;
uint16_t scaledbeat = scale16( beatsin, rangewidth);
uint16_t result = lowest + scaledbeat;
return result;
}
/// beatsin16 generates a 16-bit sine wave at a given BPM,
/// that oscillates within a given range.
LIB8STATIC uint16_t beatsin16(accum88 beats_per_minute, uint16_t lowest, uint16_t highest, uint32_t timebase, uint16_t phase_offset)
{
uint16_t beat = beat16( beats_per_minute, timebase);
uint16_t beatsin = (sin16( beat + phase_offset) + 32768);
uint16_t rangewidth = highest - lowest;
uint16_t scaledbeat = scale16( beatsin, rangewidth);
uint16_t result = lowest + scaledbeat;
return result;
}
/// beatsin8 generates an 8-bit sine wave at a given BPM,
/// that oscillates within a given range.
LIB8STATIC uint8_t beatsin8( accum88 beats_per_minute, uint8_t lowest, uint8_t highest, uint32_t timebase, uint8_t phase_offset)
{
uint8_t beat = beat8( beats_per_minute, timebase);
uint8_t beatsin = sin8( beat + phase_offset);
uint8_t rangewidth = highest - lowest;
uint8_t scaledbeat = scale8( beatsin, rangewidth);
uint8_t result = lowest + scaledbeat;
return result;
}
/// Return the current seconds since boot in a 16-bit value. Used as part of the
/// "every N time-periods" mechanism
LIB8STATIC uint16_t seconds16(void)
{
uint32_t ms = GET_MILLIS();
uint16_t s16;
s16 = ms / 1000;
return s16;
}
/// Return the current minutes since boot in a 16-bit value. Used as part of the
/// "every N time-periods" mechanism
LIB8STATIC uint16_t minutes16(void)
{
uint32_t ms = GET_MILLIS();
uint16_t m16;
m16 = (ms / (60000L)) & 0xFFFF;
return m16;
}
/// Return the current hours since boot in an 8-bit value. Used as part of the
/// "every N time-periods" mechanism
LIB8STATIC uint8_t hours8(void)
{
uint32_t ms = GET_MILLIS();
uint8_t h8;
h8 = (ms / (3600000L)) & 0xFF;
return h8;
}
///@}
#endif