Merge branch 'eeprom_config'

This commit is contained in:
tmk 2013-03-11 15:35:55 +09:00
commit 48433a5e99
26 changed files with 568 additions and 167 deletions

View File

@ -14,6 +14,12 @@ SRC += $(COMMON_DIR)/host.c \
# Option modules
ifdef BOOTMAGIC_ENABLE
SRC += $(COMMON_DIR)/bootmagic.c
SRC += $(COMMON_DIR)/eeconfig.c
OPT_DEFS += -DBOOTMAGIC_ENABLE
endif
ifdef MOUSEKEY_ENABLE
SRC += $(COMMON_DIR)/mousekey.c
OPT_DEFS += -DMOUSEKEY_ENABLE

View File

@ -1,45 +1,106 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <util/delay.h>
#include "bootloader.h"
/* Start Bootloader from Application
* See
* http://www.pjrc.com/teensy/jump_to_bootloader.html
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html
*/
// TODO: support usbasp
/* Boot Section Size in bytes
* Teensy halfKay 512
* Atmel DFU loader 4096
* LUFA bootloader 4096
*/
#ifndef BOOT_SIZE
#define BOOT_SIZE 512
#ifdef PROTOCOL_LUFA
#include <LUFA/Drivers/USB/USB.h>
#endif
#define FLASH_SIZE (FLASHEND + 1)
#define BOOTLOADER_START (FLASHEND - BOOT_SIZE)
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#ifndef BOOTLOADER_SIZE
#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h.
#define BOOTLOADER_SIZE 4096
#endif
#define FLASH_SIZE (FLASHEND + 1L)
#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE)
/*
* Entering the Bootloader via Software
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
*/
#define BOOTLOADER_RESET_KEY 0xB007B007
uint32_t reset_key __attribute__ ((section (".noinit")));
/* initialize MCU status by watchdog reset */
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
USB_Disable();
cli();
_delay_ms(2000);
#endif
//
//Teensy
//
#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
// disable watchdog, if enabled
// disable all peripherals
#ifdef PROTOCOL_PJRC
cli();
UDCON = 1;
USBCON = (1<<FRZCLK); // disable USB
USBCON = (1<<FRZCLK);
UCSR1B = 0;
_delay_ms(5);
#else
// This makes custom USBasploader come up.
MCUSR = 0;
#endif
// watchdog reset
reset_key = BOOTLOADER_RESET_KEY;
wdt_enable(WDTO_250MS);
for (;;);
}
/* this runs before main() */
void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
void bootloader_jump_after_watchdog_reset(void)
{
if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
reset_key = 0;
// My custom USBasploader requires this to come up.
MCUSR = 0;
// Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
MCUSR &= ~(1<<WDRF);
wdt_disable();
((void (*)(void))BOOTLOADER_START)();
}
}
#if 0
/* Jumping To The Bootloader
* http://www.pjrc.com/teensy/jump_to_bootloader.html
*
* This method doen't work when using LUFA. idk why.
* - needs to initialize more regisers or interrupt setting?
*/
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
USB_Disable();
cli();
_delay_ms(2000);
#endif
#ifdef PROTOCOL_PJRC
cli();
UDCON = 1;
USBCON = (1<<FRZCLK);
UCSR1B = 0;
_delay_ms(5);
#endif
/*
* Initialize
*/
#if defined(__AVR_AT90USB162__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
@ -62,10 +123,9 @@ void bootloader_jump(void) {
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#endif
//
//USBasp
//
/*
* USBaspLoader
*/
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
// This makes custom USBasploader come up.
MCUSR = 0;
@ -81,7 +141,7 @@ void bootloader_jump(void) {
ADCSRA = 0; TWCR = 0; UCSR0B = 0;
#endif
// start Bootloader
((void (*)(void))BOOTLOADER_START)();
}
#endif

67
common/bootmagic.c Normal file
View File

@ -0,0 +1,67 @@
#include <stdint.h>
#include <stdbool.h>
#include <util/delay.h>
#include "matrix.h"
#include "keymap.h"
#include "eeconfig.h"
#include "bootloader.h"
#include "bootmagic.h"
void bootmagic(void)
{
if (!BOOTMAGIC_IS_ENABLED()) { return; }
/* do scans in case of bounce */
uint8_t scan = 100;
while (scan--) { matrix_scan(); _delay_ms(1); }
if (bootmagic_scan_keycode(BOOTMAGIC_BOOTLOADER_KEY)) {
bootloader_jump();
}
if (bootmagic_scan_keycode(BOOTMAGIC_DEBUG_ENABLE_KEY)) {
eeconfig_write_debug(eeconfig_read_debug() ^ EECONFIG_DEBUG_ENABLE);
}
if (bootmagic_scan_keycode(BOOTMAGIC_EEPROM_CLEAR_KEY)) {
eeconfig_init();
}
if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_CONTROL_CPASLOCK)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_CONTROL_CAPSLOCK);
}
if (bootmagic_scan_keycode(BOOTMAGIC_CAPSLOCK_TO_CONTROL)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_CAPSLOCK_TO_CONTROL);
}
if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_LALT_LGUI)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_LALT_LGUI);
}
if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_RALT_RGUI)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_RALT_RGUI);
}
if (bootmagic_scan_keycode(BOOTMAGIC_NO_GUI)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_NO_GUI);
}
if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_GRAVE_ESC)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_GRAVE_ESC);
}
if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_BACKSLASH_BACKSPACE)) {
eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_BACKSLASH_BACKSPACE);
}
}
bool bootmagic_scan_keycode(uint8_t keycode)
{
for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
matrix_row_t matrix_row = matrix_get_row(r);
for (uint8_t c = 0; c < MATRIX_COLS; c++) {
if (matrix_row & ((matrix_row_t)1<<c)) {
if (keycode == keymap_key_to_keycode(0, (key_t){ .row = r, .col = c })) {
return true;
}
}
}
}
return false;
}

75
common/bootmagic.h Normal file
View File

@ -0,0 +1,75 @@
#ifndef BOOTMAGIC_H
#define BOOTMAGIC_H
#ifndef BOOTMAGIC_IS_ENABLED
#define BOOTMAGIC_IS_ENABLED() true
#endif
/* kick up bootloader */
#ifndef BOOTMAGIC_BOOTLOADER_KEY
#define BOOTMAGIC_BOOTLOADER_KEY KC_B
#endif
/* debug enable */
#ifndef BOOTMAGIC_DEBUG_ENABLE_KEY
#define BOOTMAGIC_DEBUG_ENABLE_KEY KC_D
#endif
/* eeprom clear */
#ifndef BOOTMAGIC_EEPROM_CLEAR_KEY
#define BOOTMAGIC_EEPROM_CLEAR_KEY KC_BSPACE
#endif
/*
* key configure
*/
/* swap control and capslock */
#ifndef BOOTMAGIC_SWAP_CONTROL_CPASLOCK
#define BOOTMAGIC_SWAP_CONTROL_CPASLOCK KC_LCTRL
#endif
/* capslock to control */
#ifndef BOOTMAGIC_CAPSLOCK_TO_CONTROL
#define BOOTMAGIC_CAPSLOCK_TO_CONTROL KC_CAPSLOCK
#endif
/* swap alt and gui */
#ifndef BOOTMAGIC_SWAP_LALT_LGUI
#define BOOTMAGIC_SWAP_LALT_LGUI KC_LALT
#endif
/* swap alt and gui */
#ifndef BOOTMAGIC_SWAP_RALT_RGUI
#define BOOTMAGIC_SWAP_RALT_RGUI KC_RALT
#endif
/* no gui */
#ifndef BOOTMAGIC_NO_GUI
#define BOOTMAGIC_NO_GUI KC_LGUI
#endif
/* swap esc and grave */
#ifndef BOOTMAGIC_SWAP_GRAVE_ESC
#define BOOTMAGIC_SWAP_GRAVE_ESC KC_GRAVE
#endif
/* swap backslash and backspace */
#ifndef BOOTMAGIC_SWAP_BACKSLASH_BACKSPACE
#define BOOTMAGIC_SWAP_BACKSLASH_BACKSPACE KC_BSLASH
#endif
/*
* change default layer
*/
#ifndef BOOTMAGIC_DEFAULT_LAYER_0_KEY
#define BOOTMAGIC_DEFAULT_LAYER_0_KEY KC_0
#endif
#ifndef BOOTMAGIC_DEFAULT_LAYER_1_KEY
#define BOOTMAGIC_DEFAULT_LAYER_1_KEY KC_1
#endif
#ifndef BOOTMAGIC_DEFAULT_LAYER_2_KEY
#define BOOTMAGIC_DEFAULT_LAYER_2_KEY KC_2
#endif
#ifndef BOOTMAGIC_DEFAULT_LAYER_3_KEY
#define BOOTMAGIC_DEFAULT_LAYER_3_KEY KC_3
#endif
void bootmagic(void);
bool bootmagic_scan_keycode(uint8_t keycode);
#endif

View File

@ -27,20 +27,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "keyboard.h"
#include "bootloader.h"
#include "layer_switch.h"
#include "eeconfig.h"
#include "command.h"
#ifdef MOUSEKEY_ENABLE
#include "mousekey.h"
#endif
#ifdef HOST_PJRC
#ifdef PROTOCOL_PJRC
# include "usb_keyboard.h"
# ifdef EXTRAKEY_ENABLE
# include "usb_extra.h"
# endif
#endif
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
# include "usbdrv.h"
#endif
@ -108,6 +109,7 @@ static void command_common_help(void)
print("v: print device version & info\n");
print("t: print timer count\n");
print("s: print status\n");
print("e: print eeprom boot config\n");
#ifdef NKRO_ENABLE
print("n: toggle NKRO\n");
#endif
@ -121,10 +123,41 @@ static void command_common_help(void)
print("Paus: jump to bootloader\n");
}
#ifdef BOOTMAGIC_ENABLE
static void print_eeprom_config(void)
{
uint8_t eebyte;
eebyte = eeconfig_read_debug();
print("debug: "); print_hex8(eebyte); print("\n");
eebyte = eeconfig_read_defalt_layer();
print("defalt_layer: "); print_hex8(eebyte); print("\n");
eebyte = eeconfig_read_keyconf();
print("keyconf: "); print_hex8(eebyte); print("\n");
keyconf kc = (keyconf){ .raw = eebyte };
print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n");
print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n");
print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n");
print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n");
print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n");
print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n");
print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n");
}
#endif
static bool command_common(uint8_t code)
{
static host_driver_t *host_driver = 0;
switch (code) {
#ifdef BOOTMAGIC_ENABLE
case KC_E:
print("eeprom config\n");
print_eeprom_config();
break;
#endif
case KC_CAPSLOCK:
if (host_get_driver()) {
host_driver = host_get_driver();
@ -218,7 +251,7 @@ static bool command_common(uint8_t code)
case KC_S:
print("\n\n----- Status -----\n");
print_val_hex8(host_keyboard_leds());
#ifdef HOST_PJRC
#ifdef PROTOCOL_PJRC
print_val_hex8(UDCON);
print_val_hex8(UDIEN);
print_val_hex8(UDINT);
@ -228,7 +261,7 @@ static bool command_common(uint8_t code)
print_val_hex8(usb_keyboard_idle_count);
#endif
#ifdef HOST_VUSB
#ifdef PROTOCOL_PJRC
# if USB_COUNT_SOF
print_val_hex8(usbSofCount);
# endif
@ -247,7 +280,7 @@ static bool command_common(uint8_t code)
#ifdef EXTRAKEY_ENABLE
case KC_PSCREEN:
// TODO: Power key should take this feature? otherwise any key during suspend.
#ifdef HOST_PJRC
#ifdef PROTOCOL_PJRC
if (suspend && remote_wakeup) {
usb_remote_wakeup();
} else {

38
common/eeconfig.c Normal file
View File

@ -0,0 +1,38 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/eeprom.h>
#include "eeconfig.h"
void eeconfig_init(void)
{
eeprom_write_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
eeprom_write_byte(EECONFIG_DEBUG, 0);
eeprom_write_byte(EECONFIG_DEFAULT_LAYER, 0);
eeprom_write_byte(EECONFIG_KEYCONF, 0);
eeprom_write_byte(EECONFIG_MOUSEKEY_ACCEL, 0);
}
void eeconfig_enable(void)
{
eeprom_write_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
}
void eeconfig_disable(void)
{
eeprom_write_word(EECONFIG_MAGIC, 0xFFFF);
}
bool eeconfig_is_enabled(void)
{
return EECONFIG_IS_ENABLED() && (eeprom_read_word(EECONFIG_MAGIC) == EECONFIG_MAGIC_NUMBER);
}
uint8_t eeconfig_read_debug(void) { return eeprom_read_byte(EECONFIG_DEBUG); }
void eeconfig_write_debug(uint8_t val) { eeprom_write_byte(EECONFIG_DEBUG, val); }
uint8_t eeconfig_read_defalt_layer(void) { return eeprom_read_byte(EECONFIG_DEFAULT_LAYER); }
void eeconfig_write_defalt_layer(uint8_t val) { eeprom_write_byte(EECONFIG_DEFAULT_LAYER, val); }
uint8_t eeconfig_read_keyconf(void) { return eeprom_read_byte(EECONFIG_KEYCONF); }
void eeconfig_write_keyconf(uint8_t val) { eeprom_write_byte(EECONFIG_KEYCONF, val); }

85
common/eeconfig.h Normal file
View File

@ -0,0 +1,85 @@
/*
Copyright 2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef EECONFIG_H
#define EECONFIG_H
#include <stdint.h>
#ifndef EECONFIG_IS_ENABLED
#define EECONFIG_IS_ENABLED() true
#endif
#define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEED
/* eeprom parameteter address */
#define EECONFIG_MAGIC (uint16_t *)0
#define EECONFIG_DEBUG (uint8_t *)2
#define EECONFIG_DEFAULT_LAYER (uint8_t *)3
#define EECONFIG_KEYCONF (uint8_t *)4
#define EECONFIG_MOUSEKEY_ACCEL (uint8_t *)5
/* debug bit */
#define EECONFIG_DEBUG_ENABLE (1<<0)
#define EECONFIG_DEBUG_MATRIX (1<<1)
#define EECONFIG_DEBUG_KEYBOARD (1<<2)
#define EECONFIG_DEBUG_MOUSE (1<<3)
/* keyconf bit */
#define EECONFIG_KEYCONF_SWAP_CONTROL_CAPSLOCK (1<<0)
#define EECONFIG_KEYCONF_CAPSLOCK_TO_CONTROL (1<<1)
#define EECONFIG_KEYCONF_SWAP_LALT_LGUI (1<<2)
#define EECONFIG_KEYCONF_SWAP_RALT_RGUI (1<<3)
#define EECONFIG_KEYCONF_NO_GUI (1<<4)
#define EECONFIG_KEYCONF_SWAP_GRAVE_ESC (1<<5)
#define EECONFIG_KEYCONF_SWAP_BACKSLASH_BACKSPACE (1<<6)
/* XXX: Not portable. Bit field order depends on implementation */
typedef union {
uint8_t raw;
struct {
bool swap_control_capslock:1;
bool capslock_to_control:1;
bool swap_lalt_lgui:1;
bool swap_ralt_rgui:1;
bool no_gui:1;
bool swap_grave_esc:1;
bool swap_backslash_backspace:1;
bool reserved:1;
};
} keyconf;
bool eeconfig_is_enabled(void);
void eeconfig_init(void);
void eeconfig_enable(void);
void eeconfig_disable(void);
uint8_t eeconfig_read_debug(void);
void eeconfig_write_debug(uint8_t val);
uint8_t eeconfig_read_defalt_layer(void);
void eeconfig_write_defalt_layer(uint8_t val);
uint8_t eeconfig_read_keyconf(void);
void eeconfig_write_keyconf(uint8_t val);
#endif

View File

@ -28,10 +28,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "command.h"
#include "util.h"
#include "sendchar.h"
#include "bootloader.h"
#ifdef MOUSEKEY_ENABLE
#include "bootmagic.h"
#include "eeconfig.h"
#include "mousekey.h"
#endif
#ifdef MATRIX_HAS_GHOST
@ -59,27 +58,25 @@ void keyboard_init(void)
timer_init();
matrix_init();
/* matrix scan for boot magic keys */
#ifdef DEBOUNCE
uint8_t scan = DEBOUNCE * 2;
while (scan--) { matrix_scan(); _delay_ms(1); }
#else
matrix_scan();
#endif
/* boot magic keys */
#ifdef IS_BOOTMAGIC_BOOTLOADER
/* kick up bootloader */
if (IS_BOOTMAGIC_BOOTLOADER()) bootloader_jump();
#endif
#ifdef IS_BOOTMAGIC_DEBUG
if (IS_BOOTMAGIC_DEBUG()) debug_enable = true;
#endif
#ifdef PS2_MOUSE_ENABLE
ps2_mouse_init();
#endif
#ifdef BOOTMAGIC_ENABLE
bootmagic();
if (eeconfig_is_enabled()) {
uint8_t config;
config = eeconfig_read_debug();
// ignored if debug is enabled by program before.
if (!debug_enable) debug_enable = (config & EECONFIG_DEBUG_ENABLE);
if (!debug_matrix) debug_matrix = (config & EECONFIG_DEBUG_MATRIX);
if (!debug_keyboard) debug_keyboard = (config & EECONFIG_DEBUG_KEYBOARD);
if (!debug_mouse) debug_mouse = (config & EECONFIG_DEBUG_MOUSE);
} else {
eeconfig_init();
}
#endif
}
/*

View File

@ -26,7 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
static action_t keycode_to_action(uint8_t keycode);
#ifdef USE_KEYMAP_V2
/* converts key to action */
action_t action_for_key(uint8_t layer, key_t key)
{
@ -38,42 +38,20 @@ action_t action_for_key(uint8_t layer, key_t key)
return keycode_to_action(keycode);
}
}
#else
/*
* legacy keymap support
*/
/* translation for legacy keymap */
action_t action_for_key(uint8_t layer, key_t key)
/* Macro */
__attribute__ ((weak))
const prog_macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
/* convert from legacy keycode to action */
/* layer 16-31 indicate 'overlay' but not supported in legacy keymap */
uint8_t keycode = keymap_get_keycode((layer & OVERLAY_MASK), key.row, key.col);
action_t action;
switch (keycode) {
case KC_FN0 ... KC_FN31:
{
uint8_t layer = keymap_fn_layer(FN_INDEX(keycode));
uint8_t key = keymap_fn_keycode(FN_INDEX(keycode));
if (key) {
action.code = ACTION_KEYMAP_TAP_KEY(layer, key);
} else {
action.code = ACTION_KEYMAP_MOMENTARY(layer);
}
}
return action;
default:
return keycode_to_action(keycode);
}
return MACRO_NONE;
}
#endif
/* Function */
__attribute__ ((weak))
const prog_macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { return MACRO_NONE; }
__attribute__ ((weak))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {}
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
}
@ -83,14 +61,9 @@ static action_t keycode_to_action(uint8_t keycode)
action_t action;
switch (keycode) {
case KC_A ... KC_EXSEL:
case KC_LCTRL ... KC_RGUI:
action.code = ACTION_KEY(keycode);
break;
case KC_LCTRL ... KC_LGUI:
action.code = ACTION_LMOD(keycode);
break;
case KC_RCTRL ... KC_RGUI:
action.code = ACTION_RMOD(keycode);
break;
case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
break;
@ -109,3 +82,40 @@ static action_t keycode_to_action(uint8_t keycode)
}
return action;
}
#ifdef USE_LEGACY_KEYMAP
/*
* Legacy keymap support
* Consider using new keymap API instead.
*/
__attribute__ ((weak))
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
{
return keymap_get_keycode(layer, key.row, key.col);
}
/* Legacy keymap support */
__attribute__ ((weak))
action_t keymap_fn_to_action(uint8_t keycode)
{
action_t action = { .code = ACTION_NO };
switch (keycode) {
case KC_FN0 ... KC_FN31:
{
uint8_t layer = keymap_fn_layer(FN_INDEX(keycode));
uint8_t key = keymap_fn_keycode(FN_INDEX(keycode));
if (key) {
action.code = ACTION_KEYMAP_TAP_KEY(layer, key);
} else {
action.code = ACTION_KEYMAP_MOMENTARY(layer);
}
}
return action;
default:
return action;
}
}
#endif

View File

@ -23,24 +23,29 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "action.h"
#ifdef USE_KEYMAP_V2
/* translates key to keycode
* layer: 0-15 for base layers
* 16-31 for overlays
*/
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key);
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode);
#else
#warning "You are using LEGACY KEYAMP. Consider using NEW KEYMAP."
#ifdef USE_LEGACY_KEYMAP
/*
* legacy keymap support
* Legacy keymap
* Consider using new keymap API above instead.
*/
/* keycode of key */
__attribute__ ((deprecated))
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col);
/* layer to move during press Fn key */
__attribute__ ((deprecated))
uint8_t keymap_fn_layer(uint8_t fn_bits);
/* keycode to send when release Fn key without using */
__attribute__ ((deprecated))
uint8_t keymap_fn_keycode(uint8_t fn_bits);
#endif

View File

@ -71,7 +71,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key report size(NKRO or boot mode) */
#if defined(HOST_PJRC)
#if defined(PROTOCOL_PJRC)
# include "usb.h"
# if defined(KBD2_REPORT_KEYS) && KBD2_REPORT_KEYS > KBD_REPORT_KEYS
# define REPORT_KEYS KBD2_REPORT_KEYS

View File

@ -30,9 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/* To use new keymap framework */
#define USE_KEYMAP_V2
/* key combination for command */
#define IS_COMMAND() ( \
host_get_first_key() == KC_CANCEL \

View File

@ -25,12 +25,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT Sun keyboard converter
#define DESCRIPTION converts Sun keyboard protocol into USB
/* matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
@ -38,6 +36,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* legacy keymap support */
#define USE_LEGACY_KEYMAP
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#define BOOTLOADER_SIZE 4096
/* Serial(USART) configuration
* asynchronous, negative logic, 1200baud, no flow control

View File

@ -47,8 +47,7 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# List C source files here. (C dependencies are automatically generated.)
# project specific files
SRC += keymap.c \
matrix.c \
led.c
@ -93,23 +92,23 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOT_SIZE=4096
# Optimize size but this may cause error "relocation truncated to fit"
EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(TARGET_DIR)

View File

@ -47,7 +47,7 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
# project specific files
SRC = keymap.c \
matrix.c \
led.c
@ -57,10 +57,8 @@ CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
MCU = atmega32u4
#MCU = at90usb1286
# Processor frequency.
@ -70,15 +68,21 @@ MCU = atmega32u4 # Teensy 2.0
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOT_SIZE=4096
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
EXTRAKEY_ENABLE = yes # Audio control and System control
NKRO_ENABLE = yes # USB Nkey Rollover
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
NKRO_ENABLE = yes # USB Nkey Rollover(+500)
CONSOLE_ENABLE = yes # Console for debug
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
# Search Path

View File

@ -25,12 +25,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
/* message strings */
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
@ -41,14 +37,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Set 0 if need no debouncing */
#define DEBOUNCE 5
/* To use new keymap framework */
#define USE_KEYMAP_V2
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#define BOOTLOADER_SIZE 4096
/*
* Boot magic keys
* call some function by pressing key when pluging cable or powering on.
@ -56,10 +58,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key position on matrix(ROW:COL) */
#define KEY_FN 0x4A
#define KEY_D 0x23
#define KEY_ESC 0x00
#define KEY_IS_ON(key) matrix_is_on((key)>>4, (key)&0xF)
/* kick up bootloader */
#define IS_BOOTMAGIC_BOOTLOADER() KEY_IS_ON(KEY_FN)
/* debug on */
#define IS_BOOTMAGIC_DEBUG() KEY_IS_ON(KEY_D)
/* eeprom clear */
#define IS_BOOTMAGIC_EEPROM_CLEAR() KEY_IS_ON(KEY_ESC)
#endif

View File

@ -231,7 +231,8 @@ uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
if (layer < OVERLAYS_SIZE) {
return pgm_read_byte(&overlays[(layer)][(key.row)][(key.col)]);
} else {
debug("key_to_keycode: overlay "); debug_dec(layer); debug(" is invalid.\n");
// XXX: this may cuaes bootlaoder_jump incositent fail.
//debug("key_to_keycode: overlay "); debug_dec(layer); debug(" is invalid.\n");
return KC_TRANSPARENT;
}
}
@ -240,8 +241,9 @@ uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
if (layer < KEYMAPS_SIZE) {
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
} else {
// XXX: this may cuaes bootlaoder_jump incositent fail.
//debug("key_to_keycode: base "); debug_dec(layer); debug(" is invalid.\n");
// fall back to layer 0
debug("key_to_keycode: base "); debug_dec(layer); debug(" is invalid.\n");
return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]);
}
}

View File

@ -120,7 +120,7 @@ bool matrix_has_ghost(void)
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & (1<<col));
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline

View File

@ -107,13 +107,6 @@ CONSOLE_ENABLE = yes # Console for debug
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
#OPT_DEFS += -DBOOT_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)

View File

@ -27,18 +27,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEVICE_VER 0x0103
#define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#define BOOTLOADER_SIZE 1024
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/* To use new keymap framework */
#define USE_KEYMAP_V2
/*
* Boot magic keys
* call some function by pressing key when pluging cable or powering on.

View File

@ -27,13 +27,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#define BOOTLOADER_SIZE 2048
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/* To use new keymap framework */
#define USE_KEYMAP_V2
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -1,6 +1,6 @@
IWRAP_DIR = protocol/iwrap
OPT_DEFS += -DHOST_IWRAP
OPT_DEFS += -DPROTOCOL_IWRAP
SRC += $(IWRAP_DIR)/iwrap.c \
$(IWRAP_DIR)/suart.S \

View File

@ -26,7 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "host.h"
#include "iwrap.h"
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
# include "vusb.h"
# include "usbdrv.h"
#endif
@ -78,7 +78,7 @@ static void pullup_pins(void)
*/
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
static void disable_vusb(void)
{
// disable interrupt & disconnect to prevent host from enumerating
@ -131,7 +131,7 @@ int main(void)
//pullup_pins();
//set_prr();
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
disable_vusb();
#endif
uart_init(115200);
@ -159,12 +159,12 @@ int main(void)
last_timer = timer_read();
while (true) {
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
if (host_get_driver() == vusb_driver())
usbPoll();
#endif
keyboard_task();
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
if (host_get_driver() == vusb_driver())
vusb_transfer_keyboard();
#endif
@ -258,7 +258,7 @@ static uint8_t console_command(uint8_t c)
print("r: reset. software reset by watchdog\n");
print("i: insomniac. prevent KB from sleeping\n");
print("c: iwrap_call. CALL for BT connection.\n");
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
print("u: USB mode. switch to USB.\n");
print("w: BT mode. switch to Bluetooth.\n");
#endif
@ -281,7 +281,7 @@ static uint8_t console_command(uint8_t c)
print("iwrap_call()\n");
iwrap_call();
return 1;
#ifdef HOST_VUSB
#ifdef PROTOCOL_VUSB
case 'u':
print("USB mode\n");
init_vusb();

View File

@ -39,4 +39,6 @@ LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENAB
OPT_DEFS += -DF_USB=$(F_USB)UL
OPT_DEFS += -DARCH=ARCH_$(ARCH)
OPT_DEFS += $(LUFA_OPTS)
OPT_DEFS += -DHOST_LUFA
# This indicates using LUFA stack
OPT_DEFS += -DPROTOCOL_LUFA

View File

@ -1,7 +1,5 @@
PJRC_DIR = protocol/pjrc
OPT_DEFS += -DHOST_PJRC
SRC += $(PJRC_DIR)/main.c \
$(PJRC_DIR)/pjrc.c \
$(PJRC_DIR)/usb_keyboard.c \
@ -19,3 +17,6 @@ endif
# Search Path
VPATH += $(TOP_DIR)/$(PJRC_DIR)
# This indicates using LUFA stack
OPT_DEFS += -DPROTOCOL_PJRC

View File

@ -1,6 +1,6 @@
VUSB_DIR = protocol/vusb
OPT_DEFS += -DHOST_VUSB
OPT_DEFS += -DPROTOCOL_VUSB
SRC += $(VUSB_DIR)/main.c \
$(VUSB_DIR)/vusb.c \