Initial support for RAMA M6-A (#2600)

* Initial commit of RAMA M6-A firmware.

* Added LED support

* Added Knops support

* Fixed compile error for knops keymap.

* updated readme.md

* updated readme.md

* updated readme.md
This commit is contained in:
Wilba6582 2018-03-25 15:58:55 +11:00 committed by Jack Humbert
parent 00dfa73e4c
commit 59a784500b
12 changed files with 844 additions and 0 deletions

View File

@ -0,0 +1,190 @@
/*
Copyright 2018 Wilba
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x5241 // "RW"
#define PRODUCT_ID 0x006A // 6-A
#define DEVICE_VER 0x0001
#define MANUFACTURER RAMA.WORKS
#define PRODUCT RAMA M6-A
#define DESCRIPTION RAMA M6-A Macropad
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 6
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { E6 }
#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif

View File

@ -0,0 +1,24 @@
/* Copyright 2018 Wilba
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View File

@ -0,0 +1,298 @@
#include "../../m6_a.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
TO(1), KC_A, KC_B, KC_C, KC_D, KC_E),
KEYMAP(
TO(2), KC_F, KC_G, KC_H, KC_I, KC_J),
KEYMAP(
TO(3), KC_K, KC_L, KC_M, KC_N, KC_O),
KEYMAP(
TO(4), KC_P, KC_Q, KC_R, KC_S, KC_T),
KEYMAP(
TO(5), KC_U, KC_V, KC_W, KC_X, KC_Y),
KEYMAP(
TO(0), KC_Z, KC_1, KC_2, KC_3, KC_4)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
//keyevent_t event = record->event;
switch (id) {
case 0:
if (record->event.pressed) {
return MACRO( T(T), T(G), T(L), T(H), T(F), T(ENT), END );
}
break;
case 1:
if (record->event.pressed) {
return MACRO( T(T), T(G), T(G), T(ENT), END );
}
break;
case 2:
if (record->event.pressed) {
return MACRO( D(NO), T(L), U(NO), END );
}
break;
case 3:
if (record->event.pressed) {
return MACRO( D(LCTL), T(Z), U(LCTL), END );
}
break;
case 4:
if (record->event.pressed) {
return MACRO( D(LCTL), D(LSFT), T(Z), U(LSFT), U(LCTL), END );
}
break;
case 5:
if (record->event.pressed) {
return MACRO( D(LCTL), T(X), U(LCTL), END );
}
break;
case 6:
if (record->event.pressed) {
return MACRO( D(LCTL), T(C), U(LCTL), END );
}
break;
case 7:
if (record->event.pressed) {
return MACRO( D(LCTL), T(V), U(LCTL), END );
}
break;
}
return MACRO_NONE;
}
// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
// This is 1-based because I copied it from Knops code.
void set_switch_led(int ledId, bool state) {
if(state) {
switch(ledId) {
case 1:
PORTD |= (1<<6);
break;
case 2:
PORTB |= (1<<6);
break;
case 3:
PORTF |= (1<<5);
break;
case 4:
PORTB |= (1<<4);
break;
case 5:
PORTC |= (1<<7);
break;
case 6:
PORTF |= (1<<7);
break;
}
} else {
switch(ledId) {
case 1:
PORTD &= ~(1<<6);
break;
case 2:
PORTB &= ~(1<<6);
break;
case 3:
PORTF &= ~(1<<5);
break;
case 4:
PORTB &= ~(1<<4);
break;
case 5:
PORTC &= ~(1<<7);
break;
case 6:
PORTF &= ~(1<<7);
break;
}
}
}
void set_layer_led(int layerId) {
// UNUSED
}
void led_set_layer(int layer);
void matrix_init_user(void) {
led_init_ports();
led_set_layer(0);
}
void matrix_scan_user(void) {
}
// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
void led_init_ports() {
// Switch #1
DDRD |= (1<<6);
PORTD &= ~(1<<6);
// Switch #2
DDRB |= (1<<6);
PORTB &= ~(1<<6);
// Switch #3
DDRF |= (1<<5);
PORTF &= ~(1<<5);
// Switch #4
DDRB |= (1<<4);
PORTB &= ~(1<<4);
// Switch #5
DDRC |= (1<<7);
PORTC &= ~(1<<7);
// Switch #6
DDRF |= (1<<7);
PORTF &= ~(1<<7);
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}
void led_set_layer(int layer) {
switch(layer) {
case 0:
set_switch_led(1, true);
set_switch_led(2, false);
set_switch_led(3, false);
set_switch_led(4, false);
set_switch_led(5, false);
set_switch_led(6, false);
break;
case 1:
set_switch_led(1, false);
set_switch_led(2, true);
set_switch_led(3, false);
set_switch_led(4, false);
set_switch_led(5, false);
set_switch_led(6, false);
break;
case 2:
set_switch_led(1, false);
set_switch_led(2, false);
set_switch_led(3, true);
set_switch_led(4, false);
set_switch_led(5, false);
set_switch_led(6, false);
break;
case 3:
set_switch_led(1, false);
set_switch_led(2, false);
set_switch_led(3, false);
set_switch_led(4, true);
set_switch_led(5, false);
set_switch_led(6, false);
break;
case 4:
set_switch_led(1, false);
set_switch_led(2, false);
set_switch_led(3, false);
set_switch_led(4, false);
set_switch_led(5, true);
set_switch_led(6, false);
break;
case 5:
set_switch_led(1, false);
set_switch_led(2, false);
set_switch_led(3, false);
set_switch_led(4, false);
set_switch_led(5, false);
set_switch_led(6, true);
break;
default:
set_switch_led(1, true);
set_switch_led(2, true);
set_switch_led(3, true);
set_switch_led(4, true);
set_switch_led(5, true);
set_switch_led(6, true);
break;
}
}
bool process_record_user (uint16_t keycode, keyrecord_t *record) {
switch ( keycode )
{
case TO( 0 ):
if ( record->event.pressed )
{
led_set_layer( 0 );
}
break;
case TO( 1 ):
if ( record->event.pressed )
{
led_set_layer( 1 );
}
break;
case TO( 2 ):
if ( record->event.pressed )
{
led_set_layer( 2 );
}
break;
case TO( 3 ):
if ( record->event.pressed )
{
led_set_layer( 3 );
}
break;
case TO( 4 ):
if ( record->event.pressed )
{
led_set_layer( 4 );
}
break;
case TO( 5 ):
if ( record->event.pressed )
{
led_set_layer( 5 );
}
break;
}
return true;
}

View File

@ -0,0 +1,12 @@
![RAMA M6-A Layout Image](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/5ab7287f6d2a738f9a719568/5ab7288c1ae6cfa0dae88a59/1521952909569/m6-layout.jpg)
# Default RAMA M6-A Layout
This is an example layout to demonstrate layer toggling.
The top left key will cycle through six layers.
If LEDs are installed, one of the six LEDs will be on to indicate current layer.
LEDs should be installed cathode pin on the square pad.

View File

@ -0,0 +1,24 @@
/* Copyright 2017 Pawnerd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View File

@ -0,0 +1,120 @@
#include "../../m6_a.h"
/*KNOPS_MISC*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*KNOPS_KEYMAP*/
};
void set_led_state(int ledId, bool state) {
if(state) {
switch(ledId) {
case 0:
PORTD |= (1<<6);
break;
case 1:
PORTB |= (1<<6);
break;
case 2:
PORTF |= (1<<5);
break;
case 3:
PORTB |= (1<<4);
break;
case 4:
PORTC |= (1<<7);
break;
case 5:
PORTF |= (1<<7);
break;
}
} else {
switch(ledId) {
case 0:
PORTD &= ~(1<<6);
break;
case 1:
PORTB &= ~(1<<6);
break;
case 2:
PORTF &= ~(1<<5);
break;
case 3:
PORTB &= ~(1<<4);
break;
case 4:
PORTC &= ~(1<<7);
break;
case 5:
PORTF &= ~(1<<7);
break;
}
}
}
void led_init_ports() {
// Switch #1
DDRD |= (1<<6);
PORTD &= ~(1<<6);
// Switch #2
DDRB |= (1<<6);
PORTB &= ~(1<<6);
// Switch #3
DDRF |= (1<<5);
PORTF &= ~(1<<5);
// Switch #4
DDRB |= (1<<4);
PORTB &= ~(1<<4);
// Switch #5
DDRC |= (1<<7);
PORTC &= ~(1<<7);
// Switch #6
DDRF |= (1<<7);
PORTF &= ~(1<<7);
}
void led_set_layer(int layer) {
/*KNOPS_SIMPLELED_STATES*/
}
void matrix_init_user(void) {
led_init_ports();
led_set_layer(0);
/*KNOPS_INIT*/
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
//keyevent_t event = record->event;
/*KNOPS_MACRO*/
return NULL;
}
void matrix_scan_user(void) {
/*KNOPS_SCAN*/
}
void led_set_user(uint8_t usb_led) {
/*KNOPS_FUNCTIONALLED_STATES*/
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
/*KNOPS_PROCESS_STATE*/
return NULL;
}

View File

@ -0,0 +1,11 @@
# Default Knops Mini Layout
![Knops logo](http://knops.io/img/Knops_logo.jpg)
![Knops Mini Layout Image](https://i.imgur.com/WQBQctm.png)
This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot:
![Knops Mini Layout Image](https://i.imgur.com/afH1NOt.png)
As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.

View File

@ -0,0 +1,44 @@
/* Copyright 2018 Wilba
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "m6_a.h"
/*
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
*/

View File

@ -0,0 +1,29 @@
/* Copyright 2018 Wilba
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quantum.h"
#ifndef RAMA_M6_A_H
#define RAMA_M6_A_H
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
K00, K01, K02, K03, K04, K05 \
) { \
{ K00, K01, K02, K03, K04, K05 }, \
}
#endif // RAMA_M6_A

View File

@ -0,0 +1,15 @@
# RAMA M6-A
![RAMA M6-A](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/59fc7b1053450adf5bf9a852/1515932239307/RAMA-RAMA-M6-DSA-XO-CAPS.73-3_1.jpg?format=1500w)
A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
Hardware Supported: RAMA M6-A PCB
Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
Make example for this keyboard (after setting up your build environment):
make rama/m6_a:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

View File

@ -0,0 +1,68 @@
# MCU name
#MCU = at90usb1286
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= no # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches

9
keyboards/rama/readme.md Normal file
View File

@ -0,0 +1,9 @@
# RAMA
Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
[RAMA M6-A](https://rama.works/m6a)
[RAMA M60-A](https://rama.works/#/m60-a/)
[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)