[Keyboard] Add Jot50 handwired board (#5431)

This commit is contained in:
jotix 2019-03-18 14:56:12 -03:00 committed by Drashna Jaelre
parent 68d4f78b25
commit bd61b5b0ed
6 changed files with 254 additions and 0 deletions

View File

@ -0,0 +1,38 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Jotix
#define PRODUCT Jot50
#define DESCRIPTION A 5x12 compact ortholinear keyboard
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 12
/* pro_micro pin-out */
#define MATRIX_ROW_PINS { D7, E6, B4, B6, B2 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D3, D2, D1, D0, D4, C6 }
#define UNUSED_PINS
/* leds */
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_PIN B5
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 5
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

View File

@ -0,0 +1,6 @@
#include "jot50.h"
void matrix_init_kb(void) {
matrix_init_user();
}

View File

@ -0,0 +1,19 @@
#pragma once
#include "quantum.h"
#define LAYOUT_ortho_5x12( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \
) \
{ \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b } \
}

View File

@ -0,0 +1,88 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum planck_keycodes {
BACKLIT = SAFE_RANGE
};
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
/* Funct
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | caps | F11 | F12 | | | | | - | = | [ | ] | |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | | vol- | mute | vol+ | | | | | | | | \ |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | | prev | play | next | | | | | | | | |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | | | | | | | | | home | pgdn | pgup | end |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
*/
#define _FUNCT LAYOUT_ortho_5x12 (\
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,\
KC_CAPS, KC_F11, KC_F12, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,\
_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, KC_BSLS,\
_______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,\
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END\
)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | bspc |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | ` | Q | W | E | R | T | Y | U | I | O | P | del |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | tab | A | S | D | F | G | H | J | K | L | ; | ' |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | lshift | Z | X | C | V | B | N | M | , | . | / | enter |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
* | lctrl | lgui | lalt | ralt | lower | space | space | raise | left | down | up | right |
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
*/
[_QWERTY] = LAYOUT_ortho_5x12 (
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
[_LOWER] = _FUNCT,
[_RAISE] = _FUNCT,
[_ADJUST] = LAYOUT_ortho_5x12 (
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, RESET, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, BL_STEP, BL_BRTG, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};
uint32_t layer_state_set_user(uint32_t state) {
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
void matrix_init_user(void) {
}

View File

@ -0,0 +1,37 @@
# Jotanck
![Jotanck]
A compact 50% (12x5) ortholinear keyboard kit inspired in the Preonic made by jotix.
Keyboard Maintainer: [jotix](https://github.com/jotix)
Hardware Supported: Arduino Pro Micro
### Arduino Pro Micro Pinout
| Rows | 0 | 1 | 2 | 3 | 4 |
|-------------|----|----|----|----|----|
| Arduino pin | 6 | 7 | 8 | 10 | 16 |
| QMK pin | D7 | E6 | B4 | B6 | B2 |
| Columns | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|-------------|----|----|----|----|----|----|-----|-----|----|----|----|----|
| Arduino pin | A3 | A2 | A1 | A0 | 15 | 14 | TX0 | RXI | 2 | 3 | 4 | 5 |
| QMK pin | F4 | F5 | F6 | F7 | B1 | B3 | D3 | D2 | D1 | D0 | D4 | C6 |
| | Backlight |
|-------------|-----------|
| Arduino pin | 9 |
| QMK pin | B5 |
### Compiling the Firmware
Make example for this keyboard (after setting up your build environment):
make handwired/jot50:default
### The Defaukt Keymap
![Default Keymap](https://i.imgur.com/4WTmcSN.jpg)
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,66 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
LAYOUTS = ortho_5x12