keymap example update and tweak to set_led_bit function

This commit is contained in:
jpetermans 2017-05-24 11:20:50 -07:00
parent 164a6c994b
commit f54b4771eb
3 changed files with 21 additions and 24 deletions

View File

@ -59,7 +59,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
TT(_FNAV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO, \
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
KC_LCTL, KC_LGUI,KC_LALT, LT(_FNAV, KC_SPC), KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
),
/* numpad */
@ -68,7 +68,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______, \
_______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO, \
_______,_______,_______, MO(_BASE), _______,_______,_______,_______ \
_______,_______,_______, TO(_BASE), _______,_______,_______,_______ \
),
/* F-, arrow, and media keys */

View File

@ -16,9 +16,9 @@ digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
```
*Unused in Alphabet Layout
The IS31 includes 8 pages (or frames) 0-7 and each page consists of 144 bytes
The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
- **bytes 0 - 17** - LED control (on/off).
* 18 pins which alternate between A and B matrices (CA1, CB1, CA2, CB2, ..).
* 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..).
* Each byte controls the 8 leds on that pin with bits (8 to 1).
- **bytes 8 - 35** - Blink control.
* Same as LED control above, but sets blink on/off.
@ -31,7 +31,7 @@ In the Infinity60 project folder, led_controller.c sets up ability to write led
One function is available to directly set leds without the mailbox:
```
write_led_page(page#, array of leds by address, # of leds in array)
write_led_page(page#, array of leds by address, # of addresses in array)
```
This function saves a full page to the controller using a supplied array of led locations such as:
```c
@ -45,7 +45,7 @@ write_led_page(5, led_numpad, 16);
```
Remaining led control is done through the led mailbox using these message types:
- **SET_FULL_ROW** (3 bytes) - row#, message type, 8-bit mask. Sets all leds on one pin per the bit mask.
- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
@ -68,7 +68,7 @@ chMBPost(&led_mailbox, message, timeout);
An example:
```c
//set the message to be sent. First byte (LSB) is the led address, and second is the message type
msg=(42 << 8) | ON_LED
msg=(42 << 8) | ON_LED;
//send msg to the led mailbox
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
@ -76,7 +76,7 @@ chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
Another:
```c
msg=(46 << 8) | BLINK_TOGGLE_LED
msg=(46 << 8) | BLINK_TOGGLE_LED;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```

View File

@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "hal.h"
#include "print.h"
#include "led.h"
#include "action_layer.h"
#include "host.h"
#include "led_controller.h"
@ -199,31 +198,25 @@ static THD_FUNCTION(LEDthread, arg) {
break;
case OFF_LED:
//on/off/toggle single led, msg_args[0] = row/col of led
//on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
is31_write_data (msg_args[1], control_register_word, 0x02);
break;
case ON_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
is31_write_data (msg_args[1], control_register_word, 0x02);
break;
case TOGGLE_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
is31_write_data (msg_args[1], control_register_word, 0x02);
break;
case BLINK_OFF_LED:
//on/off/toggle single led, msg_args[0] = row/col of led
set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
is31_write_data (msg_args[1], control_register_word, 0x02);
break;
case BLINK_ON_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
is31_write_data (msg_args[1], control_register_word, 0x02);
break;
case BLINK_TOGGLE_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
is31_write_data (msg_args[1], control_register_word, 0x02);
break;
case TOGGLE_ALL:
@ -282,6 +275,10 @@ static THD_FUNCTION(LEDthread, arg) {
led_control_reg[0] = 0;
__builtin_memset(led_control_reg+1, 0, 0x12);
is31_write_data(msg_args[0], led_control_reg, 0x13);
//repeat for blink register
led_control_reg[0] = 0x12;
is31_write_data(msg_args[0], led_control_reg, 0x13);
break;
case TOGGLE_NUM_LOCK:
@ -330,7 +327,7 @@ static THD_FUNCTION(LEDthread, arg) {
* led processing functions
* ============================== */
void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action) {
void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
//returns 2 bytes: led control register address and byte to write
//action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
@ -341,11 +338,9 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
return;
}
//check for blink bit
blink_bit = action>>2;
blink_bit = action>>2;//check for blink bit
action &= ~(1<<2); //strip blink bit
//first byte is led control register address 0x00
//led_addr tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
@ -367,8 +362,9 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
}
//return word to be written in register
led_control_reg[0] = control_reg_addr;
led_control_reg[1] = column_byte;
led_control_word[0] = control_reg_addr;
led_control_word[1] = column_byte;
is31_write_data (page, led_control_word, 0x02);
}
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
@ -403,13 +399,14 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
//blink if all leds are on
if (page == 0) {
is31_read_register(0, 0x00, &temp);
chThdSleepMilliseconds(10);
if (temp == 0xFF) {
led_action |= (1<<2); //set blink bit
}
}
set_led_bit(page,led_control_word,led_addr,led_action);
is31_write_data(page, led_control_word, 0x02);
}
/* =====================