Commit Graph

12 Commits

Author SHA1 Message Date
James Churchill
37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
Takeshi ISHII
030faf951c Fix quantum/split_common/matrix.c: select_col()/select_row() (#5174)
* add temporary pdhelix(Patched Helix) code

* add test code into  quantum/split_common/matrix.c

* add test code into keyboards/handwired/pdhelix/

* Revert "add test code into keyboards/handwired/pdhelix/"

This reverts commit 9ed98f0797ddd962c99756689fc4ecb4cd067d3d.

* Revert "add test code into  quantum/split_common/matrix.c"

This reverts commit 1876d3ed69f6c213153a9f6476192be839f16c1f.

* Revert "add temporary pdhelix(Patched Helix) code"

This reverts commit 41ac92b814e3f894eaf85bc3e5bb945895342fa8.

* fix quantum/split_common/matrix.c: select_col()/select_row()
2019-02-18 13:55:20 -08:00
James Churchill
28929ad017 Simplify split_common Code significantly (#4772)
* Eliminate separate slave loop

Both master and slave run the standard keyboard_task main loop now.

* Refactor i2c/serial specific code

Simplify some of the preprocessor mess by using common function names.

* Fix missing #endif

* Move direct pin mapping support from miniaxe to split_common

For boards with more pins than sense--sorry, switches.

* Reordering and reformatting only

* Don't run matrix_scan_quantum on slave side

* Clean up the offset/slaveOffset calculations

* Cut undebounced matrix size in half

* Refactor debouncing

* Minor fixups

* Split split_common transport and debounce code into their own files

Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes

* Refactor debounce for non-split keyboards too

* Update handwired/xealous to build using new split_common

* Fix debounce breaking basic test

* Dodgy method to allow a split kb to only include one of i2c/serial

SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.

SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code

if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.

This could be better but it would require explicitly updating all the
existing split keyboards.

* Enable LTO to get lets_split/sockets under the line

* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE

* Remove avr-specific sei() from split matrix_setup

Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().

* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.

* Add comments and fix formatting.
2019-01-17 10:08:14 -08:00
James Churchill
38e01a7480 Convert split_common to use generic GPIO api 2019-01-03 20:00:27 -08:00
Takeshi ISHII
72d4e4bfd7 Replace serial.c of quantum/split_common/ (#4669)
* Add provisional Helix implementation to test the quantum/split_common.

* copy keyboards/helix/serial.[ch] to quantum/split_common/

* Make serial.c a pure driver.

Remove buffer name and buffer size from serial.c. They should be placed in the caller(matrix.c, split_utils.c).

* remove quantum/split_common/serial_backward_compatibility.h

* Changed array serial_master_buffer to structure serial_m2s_buffer.

* Changed array serial_slave_buffer to structure serial_s2m_buffer.

* Change keyboards/miniaxe/matrix.c

I also made changes to quantum/split_comon/matrix.c to keyboards/miniaxe/matrix.c.

Note: I contacted @ka2hiro, creator of miniaxe, and I got permission to change keyboards/miniaxe/matrix.c.

* update history comment in quantum/split_common/serial.c

* Revert "Add provisional Helix implementation to test the quantum/split_common."

This reverts commit 168c82ef82c88e79979d9796bab9cc819cc2f685.

* fix keyboards/miniaxe/matrix.c, quantum/split_common/matrix.c

avr-gcc 4.9.[23] report error.
avr-gcc 5.4.0, avr-gcc 7.3.0 pass.
It is funny.

* update comment quantum/split_common/serial.c

* Reserve RGBLIGHT_SPLIT macro in quantum/split_common
2018-12-24 11:14:57 -08:00
Danny Nguyen
a5fa75fcb3 Move disable JTAG code from keyboard_init to keyboard_setup
This way all split keyboards are using that code instead of just those using split_common with the fix
2018-11-02 14:31:29 -07:00
Chiang Fong Lee
96c9ebc2e4 Revert "Split Common: Serial Backlight LED fix (#3586)"
This reverts commit 3eabd7946e.
2018-09-27 19:56:35 -07:00
Danny
3dbdfbd99a Add support for a different pinout on Split boards (#3869)
* Add support for a different pinout for the right half of a split keyboard (number of cols/rows still has to be the same)
2018-09-09 19:42:46 -07:00
Seth Barberee
3eabd7946e Split Common: Serial Backlight LED fix (#3586) 2018-08-11 11:10:23 -07:00
Seth Barberee
ed99581161 Convert Iris to use SPLIT_KEYBOARD (#3458)
* convert iris to split-common

* Fix build error
2018-07-22 06:56:14 -07:00
That-Canadian
a012113d63 Split common (#3429)
* Line ending stuff again

* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)

* Added personal keymap, updated some of the EH files

* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional

* Added split code from lets_split, removed pro micro imports and LED code

THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT

* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now

* Updated eh.c

* More rework of the I2C code, added global flags for split boards.

* Introduced RGB over I2C, having weird edge case issues at the moment though

* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..

* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C

* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.

- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed

* Updated documentation for the new makefile options and #defines specific to split keyboards

* Added a bit more info to docs, so people aren't confused

* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder

* Removed some debugging from eh.c

* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).

* Added a README file to the Let's Split Eh?

* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c

* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.

* Fixed lets_split_eh not having a default version

* Removed "eh" references from lets_split folder for now

* Took lets_split folder from master to fix travis build errors, weird my local was overriding.

* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others

* Removed rules.mk from my lets_split keymap, not needed

* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"

* Fixed split_common assuming I2C for RGB and Backlight. Added serial backlight support (stole from bakingpy's Levinson code ;) ) Serial RGB not implemented yet. Also Added "USE_IC2" to the lets_split_eh/eh as that was looked over.

* Fixed stupid mistake, forgot to set BACKLIT_DIRTY to false after setting slave backlit settings for serial

* Updated backlight data block to be cleaner (thanks drashna ;) )
2018-07-17 14:54:07 -04:00
That-Canadian
0fab3bbde3 Lets split eh (#3120)
* Line ending stuff again

* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)

* Added personal keymap, updated some of the EH files

* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional

* Added split code from lets_split, removed pro micro imports and LED code

THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT

* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now

* Updated eh.c

* More rework of the I2C code, added global flags for split boards.

* Introduced RGB over I2C, having weird edge case issues at the moment though

* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..

* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C

* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.

- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed

* Updated documentation for the new makefile options and #defines specific to split keyboards

* Added a bit more info to docs, so people aren't confused

* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder

* Removed some debugging from eh.c

* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).

* Added a README file to the Let's Split Eh?

* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c

* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.

* Fixed lets_split_eh not having a default version

* Removed "eh" references from lets_split folder for now

* Took lets_split folder from master to fix travis build errors, weird my local was overriding.

* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others

* Removed rules.mk from my lets_split keymap, not needed

* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-16 22:25:02 -04:00