qmk_firmware/keyboards/lily58/keymaps/hvp/keymap.c

181 lines
6.6 KiB
C

#include QMK_KEYBOARD_H
#include "hvp.c"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
#define _NAVI 4
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
NAVI,
ADJUST
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
LT(3,KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
LT(_NAVI,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,
KC_LSFT, KC_A, KC_S, KC_D, LT(4,KC_F), LT(3,KC_G), KC_H, KC_J, KC_K, KC_L, TD(TD1), TD(TD2),
KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, MT(MOD_LSFT,KC_BSPC), MT(MOD_LSFT,KC_ENTER), KC_N, KC_M, KC_COMM, KC_DOT, TD(TD3), MT(MOD_RSFT,KC_ENT),
KC_LALT, KC_LGUI, LOWER,LT(1,KC_SPC), LT(2,KC_SPC), RAISE, KC_RALT, KC_RGUI
),
[_RAISE] = LAYOUT( /* Right */
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
KC_DEL, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
_______, _______, _______, _______, _______, _______, MT(MOD_LCTL,KC_LBRC), MT(MOD_LALT,KC_RBRC), _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
_______, _______, _______, _______, _______, _______, _______, _______
),
[_LOWER] = LAYOUT( /* Left */
_______, _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______,
KC_TILD,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
KC_DEL, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS,
_______, _______, _______, _______, _______, _______, MT(MOD_LCTL,KC_LCBR), MT(MOD_LALT,KC_RCBR), _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TILD,
_______, _______, _______, _______, _______, _______, _______, _______
),
[_NAVI] = LAYOUT( /* Tab */
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, D_NAVI, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______,
_______, KC_VOLD, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_VOLU, _______
),
[_ADJUST] = LAYOUT( /* Esc */
_______, RGB_TOG, RGB_MOD, RGB_RMOD, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______,
_______, RGB_M_P, RGB_HUD, RGB_HUI, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______,
KC_PSCR, _______, RGB_SAD, RGB_SAI, _______, _______, KC_0, KC_1, KC_2, KC_3, _______, _______,
RESET, _______, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, KC_VOLD, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_VOLU, _______
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}