qmk_firmware/keyboards/hs60/v2/config.h

140 lines
4.7 KiB
C

/*
Copyright 2018 Yiancar
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x8968
#define PRODUCT_ID 0x4853
#define DEVICE_VER 0x0002
#define MANUFACTURER Yiancar-Designs
#define PRODUCT HS60 V2
#define DESCRIPTION GH60 compatible, tool free RGB keyboard
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3 }
// To enable debugger set A13 A14 -> A5 A6
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* Backlight options */
#define RGB_BACKLIGHT_ENABLED 1
#define RGB_BACKLIGHT_HS60
// they aren't really used if RGB_BACKLIGHT_HS60 defined
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default effect (RGB test)
#define RGB_BACKLIGHT_EFFECT 255
#define DRIVER_COUNT 2
#define DRIVER_LED_TOTAL 64
// These define which keys in the matrix are alphas/mods
// Used for backlight effects so colors are different for
// alphas vs. mods
// Each value is for a row, bit 0 is column 0
// Alpha=0 Mod=1
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0010000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0010000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0010000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC_ADDR 32
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 34
// Backlight config starts after EEPROM version
#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
// Dynamic keymap starts after backlight config (35+32)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 67
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// Dynamic macro starts after dynamic keymaps (67+(4*5*14*2)) = (67+560)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 627
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
#define DYNAMIC_KEYMAP_MACRO_COUNT 16