qmk_firmware/keyboards/crkbd
Lucas Moreira 9ff61601e3 [Keymap] crkbd/kidbrazil adding layer dependent RGB & better idle timeout. (#7901)
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output

* Added missing readme

* Oled Timeout Update for KidBrazil Keymap (#1)

* Setup Oled timeout based on simple timer

* Cleaned up comments and added timeout for LEDs

* Fixed some small errors

* Updated oled timout with matrix scan

* Updated oled timout with matrix scan

* Update withou eeprom

* Update timer code

* Use process user instead of keymap

* Added ifdef to protect oledtimer

* Updated with half timeout state for logo

* Removed middle tier timer

* Final cleanup of unused files

* Updated code as per suggestions & requests

* Second round of revisions

* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands

* Finished adding the timeout for OLED and testing on CRKBD

* Updated documentation

* fixed the timeout logic so it works as intended

* Added initial limits to color settings

* Added layer reset as part of the iddle timeout process

* Split Keymap into more manageable files

* Finalizing RGB Layer status on CRKBD
- Refactored OLED timeout to deal only with oled
- If user remains iddle on game layer for too long it will switch to
default
- LED / OLED iddle working
- Minor changes to _SYM layer
- Removed some rgb controls from keyboard due to layer dependent RGB
colors

* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c

Used suggestion from Drashna to replace EEPROM_RESET with shorter version.

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Implemented drashna's comment

Co-authored-by: Drashna Jaelre <drashna@live.com>
2020-01-25 14:43:57 -08:00
..
keymaps [Keymap] crkbd/kidbrazil adding layer dependent RGB & better idle timeout. (#7901) 2020-01-25 14:43:57 -08:00
lib Reduce CRKBD firmware size by reducing layer numbers (#5471) 2019-04-18 14:02:32 -07:00
rev1 Fix processing of RGB keycodes on slave half (#7404) 2019-11-28 21:59:14 +00:00
config.h Keyboard: Crkbd: move I2C and Serial defines to keyboard's config.h (#3970) 2018-09-23 18:47:43 -07:00
crkbd.c [Keyboard] Fix up and clean Corne Keyboard code (#6284) 2019-07-28 10:56:35 -07:00
crkbd.h Keyboard: Improvement of crkbd communication functions (based on helix-keyboard) (#3798) 2018-09-03 16:34:16 -07:00
i2c.c Keyboard: Improvement of crkbd communication functions (based on helix-keyboard) (#3798) 2018-09-03 16:34:16 -07:00
i2c.h Keyboard: Improvement of crkbd communication functions (based on helix-keyboard) (#3798) 2018-09-03 16:34:16 -07:00
info.json Fix Corne (crkbd) keyboard dimensions in info.json 2019-04-13 01:27:38 -07:00
readme.md [Keyboard] Change Corne RGB Matrix split handling (#7117) 2019-10-28 16:29:00 -07:00
rules.mk Cleanup rules.mk for 32U4 keyboards, A-F (#6804) 2019-10-05 11:09:35 -07:00
serial.c Remove duplicate pro_micro.h (#7246) 2019-11-03 22:35:43 +00:00
serial.h Keyboard: Update the serial.c of crkbd based on the helix-serial.c (#4349) 2018-11-04 10:46:26 -08:00
ssd1306.c Fix the modifier of font variable in ssd1306.c (#5880) 2019-05-17 12:37:12 -07:00
ssd1306.h Fix up screen off timer of crkbd (#4346) 2018-11-12 12:19:29 -08:00

readme.md

Corne Keyboard (CRKBD)

Also known (incorrectly) as the HeliDox.

Crkbd

Crkbd

A split keyboard with 3x6 vertically staggered keys and 3 thumb keys.

Keyboard Maintainer: foostan @foostan
Hardware Supported: Crkbd PCB, Pro Micro
Hardware Availability: PCB & Case Data

Make example for this keyboard (after setting up your build environment):

make crkbd:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

RGB Matrix

The Corne Keyboard also supports using the RGB Matrix feature, in place of RGB Light. This provids a better experience when using the keyboard, as it supports a number of per key effects properly. If you're not using the in switch LEDs, then you may want to pass on doing this.

In your keymap's rules.mk file, add the following:

RGBLIGHT_ENABLE = no
RGB_MATRIX_ENABLE = WS2812

And in your config.h file, add the following:


#ifdef RGB_MATRIX_ENABLE
#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
#    define RGB_MATRIX_HUE_STEP 8
#    define RGB_MATRIX_SAT_STEP 8
#    define RGB_MATRIX_VAL_STEP 8
#    define RGB_MATRIX_SPD_STEP 10

/* Disable the animations you don't want/need.  You will need to disable a good number of these    *
 * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
// #   define DISABLE_RGB_MATRIX_ALPHAS_MODS
// #   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
// #   define DISABLE_RGB_MATRIX_BREATHING
// #   define DISABLE_RGB_MATRIX_CYCLE_ALL
// #   define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
// #   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
// #   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
// #   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
// #   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
// #   define DISABLE_RGB_MATRIX_DUAL_BEACON
// #   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
// #   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
// #   define DISABLE_RGB_MATRIX_RAINDROPS
// #   define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
// #   define DISABLE_RGB_MATRIX_TYPING_HEATMAP
// #   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
// #   define DISABLE_RGB_MATRIX_SPLASH
// #   define DISABLE_RGB_MATRIX_MULTISPLASH
// #   define DISABLE_RGB_MATRIX_SOLID_SPLASH
// #   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif

After this is done, you should be able to use the normal RGB keycodes, but you'll see the RGB Matrix effects in use, giving a much better experience.