qmk_firmware/keyboards/panc60
fauxpark de4a47f1cc Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
..
keymaps/default Keyboard: Panc60 (#3961) 2018-09-23 13:48:48 -07:00
config.h Remove NO_BACKLIGHT_CLOCK (#6418) 2019-07-27 01:37:33 +01:00
info.json Keyboard: Panc60 (#3961) 2018-09-23 13:48:48 -07:00
panc60.c [Keyboard] Panc60 Refactor (#5559) 2019-04-06 18:08:57 -07:00
panc60.h [Keyboard] Panc60 Refactor (#5559) 2019-04-06 18:08:57 -07:00
readme.md [Keyboard] Bootmagic does not actually work on BMC boards, removing from panc60 (#5573) 2019-04-08 11:03:53 -07:00
rules.mk Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
usbconfig.h [Keyboard] Panc60 Refactor (#5559) 2019-04-06 18:08:57 -07:00

readme.md

panc60

panc60

The panc60 is a 60% PCB with backlight and rgb underglow.

Keyboard Maintainer: MechMerlin, Jack Humbert
Hardware Supported: panc60 PCB
Hardware Availability: PANC Interactive

Make example for this keyboard (after setting up your build environment):

make panc60:default

Flashing

Reset Key: Hold down the key located at K40, commonly programmed as left control while plugging in the keyboard.

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

To put the panc60 into reset, hold left control while plugging in.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.