qmk_firmware/keyboards/sol/rev1/config.h
Legonut 8a330b33ff Keyboard: Add new keyboard "Sol" from RGBKB (#4497)
* Add final RGBKB Sol firmware

* Apply suggestions from code review

Apply most of the changes noroadsleft has suggested

Co-Authored-By: Legonut <legonut3@gmail.com>

* Cleanup readme

* Cleanup keymaps per @noroadslefts suggestions

* Remove eeproms, use set_single_persistent_default_layer

* Suggestions from @noroadsleft and @drashna

some small cleanup

* Change RGB_SMOD to RGB_RMOD

* fix RGB_SMOD

* Apply suggestions from code review

Remove redundant lines

Co-Authored-By: Legonut <legonut3@gmail.com>
2018-12-04 18:15:52 -08:00

156 lines
3.9 KiB
C

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER RGBKB
#define PRODUCT Sol
#define DESCRIPTION "An RGB, split, ortho-esque keyboard"
#define PREVENT_STUCK_MODIFIERS
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 150
#define USE_I2C
#define USE_SERIAL
#define USE_SERIAL_PD3
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
// Helix keyboard OLED support
// see ./rules.mk: OLED_ENABLE=yes or no
#ifdef OLED_ENABLE
#define SSD1306OLED
#endif
/* Select rows configuration */
// Rows are 4 or 5
// #define HELIX_ROWS 5 see ./rules.mk
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 12
#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6}
// wiring of each half
#define MATRIX_COLS 7
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 }
// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* ws2812 RGB LED */
#define RGB_DI_PIN B3
#define RGBLIGHT_TIMER
//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
#define DRIVER_COUNT 2
#define DRIVER_LED_TOTAL 70
// #define RGB_MATRIX_KEYPRESSES
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 5
#ifdef LED_MIRRORED
#define RGBLED_NUM 35
#else
#define RGBLED_NUM 70
#endif
#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950
#ifdef IOS_DEVICE_ENABLE
#define RGBLIGHT_LIMIT_VAL 40
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40
#elif RGBLIGHT_FULL_POWER
#define RGBLIGHT_LIMIT_VAL 255
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
#else
#define RGBLIGHT_LIMIT_VAL 120
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#endif
#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10)
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_ANIMATIONS
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
// 120 RGBoff, OLEDoff
// 120 OLED
// 330 RGB 6
// 300 RGB 32
// 310 OLED & RGB 32
#define USB_MAX_POWER_CONSUMPTION 500
#else
// fix iPhone and iPad power adapter issue
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif