qmk_firmware/keyboards/bfake
2019-09-20 22:06:32 -07:00
..
keymaps QMK Configurator Support (#2821) 2018-04-27 15:17:39 -07:00
bfake.c Add support for key backlighting to bfake 2018-02-02 00:58:26 -05:00
bfake.h Fix bfake matrix bug (#3180) 2018-06-14 19:28:25 -07:00
config.h Remove NO_BACKLIGHT_CLOCK (#6418) 2019-07-27 01:37:33 +01:00
i2c.c
i2c.h
info.json Fix bfake matrix bug (#3180) 2018-06-14 19:28:25 -07:00
matrix.c
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
usbconfig.h

B.fake

A 60% keyboard with RGB. The B.fake pcb is a copy of the B.face PCB sold by winkeyless. However, the switch matrix is actually the same as the FaceW, a ps2avr PCB sold on mechanicalkeyboards.com.

Keyboard Maintainer: QMK Community
Hardware Supported: B.fake PCB
Hardware Availability: https://www.aliexpress.com/store/product/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/2230037_32731084597.html

Make example for this keyboard (after setting up your build environment):

make bfake:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python
    brew install pyusb
    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See build environment setup then the make instructions for more information.