qmk_firmware/lib/lufa/Projects/RelayBoard/RelayBoard.c

146 lines
3.8 KiB
C

/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 OBinou (obconseil [at] gmail [dot] com)
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the RelayBoard program. This file contains the main tasks of
* the project and is responsible for the initial application hardware configuration.
*/
#include "RelayBoard.h"
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
GlobalInterruptEnable();
for (;;)
USB_USBTask();
}
/** Configures the board hardware and chip peripherals for the project's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
USB_Init();
/* Initialize Relays */
DDRC |= ALL_RELAYS;
PORTC &= ~ALL_RELAYS;
}
/** Event handler for the library USB Control Request reception event. */
void EVENT_USB_Device_ControlRequest(void)
{
const uint8_t SerialNumber[5] = { 0, 0, 0, 0, 1 };
uint8_t ControlData[2] = { 0, 0 };
switch (USB_ControlRequest.bRequest)
{
case 0x09:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
LEDs_ToggleLEDs(LEDS_LED1);
Endpoint_ClearSETUP();
Endpoint_Read_Control_Stream_LE(ControlData, sizeof(ControlData));
Endpoint_ClearIN();
switch (USB_ControlRequest.wValue)
{
case 0x303:
if (ControlData[1]) PORTC &= ~RELAY1; else PORTC |= RELAY1;
break;
case 0x306:
if (ControlData[1]) PORTC &= ~RELAY2; else PORTC |= RELAY2;
break;
case 0x309:
if (ControlData[1]) PORTC &= ~RELAY3; else PORTC |= RELAY3;
break;
case 0x30c:
if (ControlData[1]) PORTC &= ~RELAY4; else PORTC |= RELAY4;
break;
}
}
break;
case 0x01:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
LEDs_ToggleLEDs(LEDS_LED1);
Endpoint_ClearSETUP();
switch (USB_ControlRequest.wValue)
{
case 0x301:
Endpoint_Write_Control_Stream_LE(SerialNumber, sizeof(SerialNumber));
break;
case 0x303:
ControlData[1] = (PORTC & RELAY1) ? 2 : 3;
break;
case 0x306:
ControlData[1] = (PORTC & RELAY2) ? 2 : 3;
break;
case 0x309:
ControlData[1] = (PORTC & RELAY3) ? 2 : 3;
break;
case 0x30c:
ControlData[1] = (PORTC & RELAY4) ? 2 : 3;
break;
}
if (ControlData[1])
Endpoint_Write_Control_Stream_LE(ControlData, sizeof(ControlData));
Endpoint_ClearOUT();
}
break;
}
}