qmk_firmware/keyboards/ergodox_ez
Erez Zukerman 8680c50d07 Removes Erez personally from QMK (#5883) 2019-05-15 19:53:45 -04:00
..
keymaps [Keymap] Pvinis master (#5843) 2019-05-14 12:02:22 -07:00
util
190hotfix.sh
config.h Cleanup/rgb matrix (#5811) 2019-05-10 16:55:02 -07:00
ergodox_ez.c rgb_led struct conversion (aka: Per led (key) type rgb matrix effects - part 2) (#5783) 2019-05-07 16:22:46 -07:00
ergodox_ez.h
info.json Removes Erez personally from QMK (#5883) 2019-05-15 19:53:45 -04:00
matrix.c Removes Erez personally from QMK (#5883) 2019-05-15 19:53:45 -04:00
readme.md
rules.mk

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.