Commit Graph

5989 Commits

Author SHA1 Message Date
Jack Humbert
9f5b4e1d7a Merge branch 'master' of https://github.com/qmk/qmk_firmware into dual_audio 2017-06-27 14:21:42 -04:00
Jack Humbert
b82604dada no glide 2017-06-27 14:20:53 -04:00
Jack Humbert
bfc73e90cf working duopholy 2017-06-27 14:20:44 -04:00
Jack Humbert
eabf530a0e b5 audio 2017-06-27 14:20:14 -04:00
Jack Humbert
4ba9438c3f Add eclipse to the _summary 2017-06-27 13:07:50 -04:00
Jack Humbert
b2979eba23 Adds parenthesis where they might be needed
Addresses #764
2017-06-27 12:55:18 -04:00
Erez Zukerman
98391605ca Merge pull request #1441 from lindhe/swedish
Create sv_SE Qwerty layout for ErgoDox EZ
2017-06-27 11:33:29 -04:00
Andreas Lindhé
a25dbaad32 Create sv_SE Qwerty layout for ErgoDox
*NOTE:* it might still be desirable to set the software layout to sv_SE in your
OS.

Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration

I have tried making this as close of a match I could between the [default
ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
standard Swedish Qwerty layout.

Notable differences from default:
=================================

* There are three special character buttons (acute accent, circumflex/tilde and
  apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
  these at other places:

    * Acute accent (´) can be found in the lower left corner, conveniently
      placed to reach for making an é.

    * Apostrophe (') was put in the lower left corner, close to acute accent.

    * Circumflex (^) and asterisk (*) was placed in the lower right corner.

    * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
      those out. I could only get the buttons to produce a single one of the
      characters. How can I get it to work properly?

* The Alt button on right thumb was exchanged for AltGr (RAlt).

* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
  more sensible.

* I didn't find a good place for the "<>|" button, so that one was left out.
  That is a problem that really needs to be resolved. Pipe can be found on layer
  one, however.
2017-06-27 15:17:21 +02:00
Jack Humbert
61cdc9aaa4 Allow mod swapping for mod tap (MT) (#1202)
* allow mod swapping for mod tap

* quick include

* fix the mod swapping

* make changes consistent with action code

* fix bug

* re-enable no gui, etc

* fix binary comps

* solid logic
2017-06-26 18:54:01 -04:00
Jack Humbert
d1fb8d2296 Merge pull request #1431 from rai-suta/master
Bugg fix and add keymap for testing JIS_KEYCODE switch.
2017-06-25 21:31:10 -04:00
Ethan Madden
42e6ecc36b Whitefox LED control (#1432)
* use new grave_esc functionality

* Port LED control from Ergodox Infinity to Whitefox
2017-06-25 21:30:40 -04:00
Art Ortenburger
43579a80a7 add support for Orthodox keyboard (#1436)
* Added orthodox

* Modified readme

* Modified readme

* Modified readme

* Updated makefile

* Fixed keymap issues

* Modified serial communications to allow for over 8 columns

* Fixed sizeof command

* Fixed some typing issues

* Testing issue #1191 (n-column split i2c slave)

Based on initial OrthoDox (serial) config by @reddragond and others,
this attempts to add TWI (I2C) support.
Relevant: <https://github.com/qmk/qmk_firmware/issues/1191>

- per @ahtn recommendation, using memcpy for moving slave matrix
  into slave sending buffer
- slave buffer has been enlarged using sizeof(matrix_row_t)
- note: i2c.h now includes matrix.h
- note: matrix.c includes <string.h>

* Added i2c keymap - right col still not working

* orthodox: re-added i2c keymap, based on serial

* orthodox / issue #1191: trying 9-bit serial

- orthodox serial protocol now sends 9 bits per row, instead of 16.
  Technically it's using MATRIX_COLS, so it might work generically.
- ROW_MASK is #defined in serial.c to truncate the checksums to prevent
  overflows causing false errors. This macro should be renamed if it's
  kept.

* Revert "Fixed sizeof command"

This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9.

Changes had been made to the lets_split serial driver for testing which
mirrored the multi-byte-row changes made to support the orthodox. As the
lets_split does not require these changes, and new improvements had
been added to the orthodox port only, this commit reverts them.

Because the new code could potentially reduce latency over the serial
transport, it may be desirable to re-add in the future, by backporting
the current working orthodox code.

* orthodox: default serial keymap improvements

- formatting has been improved
- a few keys have been shifted, mainly in Raise and Lower layers,
  to be more like the default Planck layout
- Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play

Still To Do:
- duplicate for TWI
- Alt modifier
- GUI modifier

* orthodox: failed attempt at 16b/row TWI

- duplicated updated serial keymap for "i2c"
- removed string.h/memcpy, instead
- hardcoded copying of six bytes per update
- still doesn't work; master reports interconnect errors on txled

* orthodox: adjusted default keymap

- this is applied to both 'serial' and 'i2c' keymaps
- Alt and GUI have been added, as they were missing
- comma and period persist across more layers; Home/PgUp and End/PgDn
  have been moved slightly to accommodate

* orthodox: revert TWI support to minimum to debug

- disabled ssd1306 and hardware locking in build configuration
- increased TWI buffer from 0x10 to 0x20 bytes
- decreased TWI clock from 400000 to 100000
- removed hardcoded TWI multi-byte sending/receiving

An 'i2c' build of this was found to work on a rev1 Orthodox, although
slave-side col9 was understandably not working. When testing-time
permits, features will be gradually re-enabled towards getting the full
matrix supported over TWI.

* orthodox: TWI (i2c) is working, kludge for col9

The TWI interconnect ("i2c" in directories and build config) is now
working for the Orthodox, including the slave half's column #9.
This is intended as an interim solution, as it's a kludge, not a fix.

Rather than a working multi-byte implementation, the two col9 keys'
bits are packed-into and unpacked-from the two unused bits in row1.
Furthermore, the TWI clock constant has been reduced to 100000 from
400000, as testing revealed the higher value just didn't work.
Testing also found that (with this kludge) increasing the TWI buffer
was not necessary.

This commit leaves many commented-out lines in matrix.c from previous
testing, which will be removed in a future commit once the
interconnects' multi-byte problems have been debugged more thoroughly.

* orthodox: updated readme.md

The readme for the Orthodox now includes a description of the keyboard,
allusions to its author and availability, a linked photo, and links to
the evolving build guide and the current keymap on KLE.
This update has been prepared with /u/Deductivemonkee's assistance.
2017-06-25 21:30:07 -04:00
Jack Humbert
1a4a66fd01 updates olkb readmes #1362 2017-06-25 12:40:25 -04:00
rai-suta
3a2ae6a213 Add a keymap for testing JIS_KEYCODE. 2017-06-26 00:37:46 +09:00
rai-suta
e740520b3f Fix bug. 2017-06-26 00:24:32 +09:00
Jack Humbert
169ede0715 Merge pull request #1427 from blakedietz/master
Add keymaps for ergodox ez, hhkb and jd45 under user blakedietz
2017-06-25 10:29:24 -04:00
Jack Humbert
de833659ae Merge pull request #1429 from fredizzimo/fixes_for_emulator
Minor fixes to support the emulator
2017-06-25 10:29:00 -04:00
Fred Sundvik
1e6a3f9e17 Change M_2_PI to 2 * PI as it should be 2017-06-25 12:55:18 +03:00
Blake Dietz
daf16535f1 Add keymaps for ergodox ez, hhkb and jd45 under user blakedietz 2017-06-24 22:46:07 -06:00
skullY
62c77e7dbf Remove the DIODE_DIRECTION defines from lets_split so we can close #1067 2017-06-24 17:08:43 -07:00
skullY
582a6ac75c Fix #1135 by changing the default to at90usb1286 2017-06-24 15:28:13 -07:00
Jack Humbert
901a92a2fd Update _summary.md 2017-06-24 13:11:25 -04:00
Jack Humbert
f175f5df95 Merge pull request #1425 from kynikos/patch-1
Fix typo
2017-06-24 11:39:15 -04:00
Jack Humbert
6c81656e8e Merge pull request #1426 from rai-suta/master
Add JIS_KEYCODE layout for send_string()
2017-06-24 11:38:38 -04:00
rai-suta
5dae013ff8 Add JIS_KEYCODE layout for send_string() 2017-06-24 18:29:37 +09:00
Dario Giovannetti
30ab4dd14f Fix typo 2017-06-24 16:32:10 +08:00
Jack Humbert
c208a6d4e5 update docs for isp 2017-06-23 23:09:14 -04:00
Jack Humbert
b9987d65f9 Merge branch 'master' of https://github.com/qmk/qmk_firmware 2017-06-23 23:07:01 -04:00
Jack Humbert
2c65a17752 add other mcu bootloaders 2017-06-23 23:05:42 -04:00
Jack Humbert
dfa6417ae3 Merge pull request #1422 from nstickney/master
update ErgoDox "Familiar" layout
2017-06-23 21:48:17 -04:00
Jack Humbert
918aea5b47 Update _summary.md 2017-06-23 21:29:35 -04:00
Jack Humbert
b4f2f44a6f Create isp_flashing_guide.md 2017-06-23 21:29:04 -04:00
Jack Humbert
1524c2cb16 Merge pull request #1418 from npoirey/master
Frenchdev v1
2017-06-23 18:05:33 -04:00
npoirey
8ad12b1eb7 Updated frenchdev readme 2017-06-23 23:59:30 +02:00
Fred Sundvik
dcf9fa1aaa Update the ugfx submodule 2017-06-24 00:37:27 +03:00
Fred Sundvik
f912c74fe7 Change inline to static inline 2017-06-24 00:34:16 +03:00
Fred Sundvik
574ca7f59c Delete emulator drivers 2017-06-24 00:34:16 +03:00
Fred Sundvik
da19852964 Add function for getting the LCD backlight brightness 2017-06-24 00:34:16 +03:00
Fred Sundvik
ff49259a1a Include config.h from visualizer.h 2017-06-24 00:34:16 +03:00
Fred Sundvik
b0094e631e Change remote url of uGFX to relative path 2017-06-24 00:34:16 +03:00
Fred Sundvik
6c9b4743f7 Include config.h before visualizer.h 2017-06-24 00:33:23 +03:00
Stick
e43e58aad1 updated README.md 2017-06-23 16:28:06 -05:00
Stick
f4e4d6f8d0 Merge remote-tracking branch 'upstream/master' 2017-06-23 16:02:44 -05:00
Stick
37987837b1 added media keys; many bug fixes 2017-06-23 16:02:01 -05:00
npoirey
a3f151b8e9 Refactoring frenchdev 2017-06-23 21:35:33 +02:00
npoirey
de80e2c756 Moved frenchdev to handwired 2017-06-23 21:25:46 +02:00
Jack Humbert
a1ce43781a Merge pull request #1421 from 333fred/update-layout
Update my layout
2017-06-23 14:43:51 -04:00
Jack Humbert
91f3a73a28 Merge pull request #1419 from Wraul/phantom-improvements
Phantom improvements
2017-06-23 14:43:32 -04:00
Fredric Silberberg
6794495336
Doc updates 2017-06-23 11:36:14 -07:00
Fredric Silberberg
2b26abf9a9
Copy/paste additions. 2017-06-23 11:24:55 -07:00