qmk_firmware/keyboards/panc60/readme.md
MechMerlin 15d7c5f0bd [Keyboard] Bootmagic does not actually work on BMC boards, removing from panc60 (#5573)
* remove unneeded uart setting

* use pragma once everywhere

* remove custom matrix support

* fixup readme

* set bootmagic to lite

* remove dependency on custom i2c code

* use the right header files and function calls

* remove bootmagic support as it doesn't work on bmc boards

* readme merge artifacts removal
2019-04-08 11:03:53 -07:00

49 lines
2.0 KiB
Markdown

# panc60
![panc60](https://imgix.ttcdn.co/i/product/original/0/670893-eca4599c4aad489dbe62609ac2fed86e.jpeg?q=100&auto=format%2Ccompress&w=500)
The panc60 is a 60% PCB with backlight and rgb underglow.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert)
Hardware Supported: panc60 PCB
Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb)
Make example for this keyboard (after setting up your build environment):
make panc60:default
Flashing
**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard.
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
To put the panc60 into reset, hold left control while plugging in.
Windows:
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
2. Place your keyboard into reset.
3. Press the `Find Device` button and ensure that your keyboard is found.
4. Press the `Open .hex File` button and locate the `.hex` file you created.
5. Press the `Flash Device` button and wait for the process to complete.
macOS:
1. Install homebrew by typing the following:
```
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
```
2. Install `crosspack-avr`.
```
brew cask install crosspack-avr
```
3. Install the following packages:
```
brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
4. Place your keyboard into reset.
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).