qmk_firmware/keyboards/satan/readme.md
fauxpark 220551ed5f [Keyboard] GH60 Satan improvements (#5264)
* GH60 Satan improvements

* Link no worky

* Accidentally a h

* Use MOD_MASK_SHIFT from core

* Remove nonexistent layouts from here
2019-02-28 12:06:26 -08:00

34 lines
1.2 KiB
Markdown

# Satan GH60
A clone of the GH60 60% keyboard, with full backlighting support.
Keyboard Maintainer: QMK Community
Hardware Supported: Satan GH60 PCB
Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/
Make example for this keyboard (after setting up your build environment):
make satan:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## RGB Underglow (WS2812B LED Strip)
This board also supports underglow with a slight mod.
Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:
![controller](https://i.imgur.com/9vyRBoT.jpg)
Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:
![power](https://i.imgur.com/pHMZHLP.jpg)
## ISP Header
If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|----|---|----|-----|---|----|
|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|