qmk_firmware/keyboards/ergodox_ez/readme.md
Seebs 39d3d92364 Allow multiple process_record() calls per scan
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.

This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.

Signed-off-by: seebs <seebs@seebs.net>
2017-11-21 00:20:52 -05:00

39 lines
1.1 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# ErgoDox EZ
The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html).
Linux users need to modify udev rules as described on the [Teensy
Linux page]. Some distributions provide a binary, maybe called
`teensy-loader-cli`.
[Teensy Linux page]: https://www.pjrc.com/teensy/loader_linux.html
To flash the firmware:
- Build the firmware with `make keymapname`, for example `make default`
- This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
`ergodox_ez_default.hex`
- Start the teensy loader.
- Load the .hex file into it.
- Press the Reset button by inserting a paperclip gently into the reset hole
in the top right corder.
- Click the button in the Teensy app to download the firmware.
To flash with ´teensy-loader-cli´:
- Build the firmware with `make keymapname`, for example `make default`
- Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_<keymap>.hex´
- Press the Reset button by inserting a paperclip gently into the reset hole
in the top right corder.
## Settings
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively
slow scan rate.